Weekly Mileage Buildup Calculator

Plan a gradual mileage increase week by week.

How it is calculated

You give your current weekly distance D, the number of weeks n and the weekly increase p in percent. With f = 1 + p/100, next week's distance is D × f and the distance after n weeks is D × fn, because each week grows from the week before (compound growth, not a fixed number of kilometers added). Results are shown to one decimal, labeled km. If the increase is left empty it defaults to 10%. Current distance must be above zero, and weeks must be a whole number from 1 to 52. An increase above 50% a week, or of −100% or less, shows no result, while a smaller negative figure such as −10 gives a cutback ramp. The tool does not insert cutback weeks by itself, and it labels the result km even if you entered miles.

Worked example

A runner does 32 km a week and plans 8 weeks of 10% increases. Growth factor: f = 1 + 10/100 = 1.10. Next week: 32 × 1.10 = 35.2 km. After 8 weeks: 32 × 1.108 = 32 × 2.1436 = 68.6 km. The tool shows 35.2 km for next week and 68.6 km after 8 weeks. The mileage more than doubles even though each step looks small, because every increase is applied to a larger base than the one before.

Try this example →

Common mistakes

  • Entering the increase as a fraction, such as 0.1 for 10%. The field is in percent, so 0.1 means a 0.1% rise per week and the plan barely moves.
  • Expecting a straight-line plan of +3.2 km each week. The increase compounds, so later weeks add more kilometers than the first ones.
  • Treating the projected number as a target for every week. A pure 10% ramp with no cutback weeks is hard to sustain, and the 10% figure is a coaching rule of thumb, not a published standard; this tool shows the pure ramp only.
  • Typing a fractional number of weeks such as 8.5. Weeks must be whole, so use 8 or 9.
  • Starting from your best week ever rather than the mileage you actually run now. The projection is only as realistic as the current figure.

Sources

Based on a common rule of thumb; no published standard was found.

About this calculator

The 10% rule is a widely cited guideline in running that caps weekly mileage increases at roughly 10% over the previous week, meant to give connective tissue, tendons and bone time to adapt to the rising load. It is a coaching rule of thumb, not a published standard. Applied over several weeks, it produces a gradually compounding curve — starting from a base mileage and increasing by 10% each week builds up faster than a flat linear increase.

Running coaches use mileage buildup plans like this when transitioning a runner from a lower training base toward marathon or ultramarathon volume, and also recommend periodic "cutback" weeks (reducing volume by 20-30% every third or fourth week) to allow additional recovery — something a rigid, uninterrupted 10% progression doesn't account for on its own. Large jumps in weekly mileage are widely thought to raise the risk of overuse injuries such as stress fractures, shin splints and tendinitis, and that is the risk the rule is meant to manage.

Was this helpful?

You can pick up to 3 reactions.

Comments

  • Be the first to comment.

Popular calculators

All Calculators