Pace per Mile Calculator

Get your pace per mile (or per km) and your speed from distance and time.

How it is calculated

Enter the total time as decimal minutes and the distance in miles, or in kilometers with the unit system set to metric. The pace is pace = time ÷ distance in minutes per mile (per km on metric). The whole-number part is the minutes and the fraction is turned into seconds, seconds = fraction × 60, rounded to the nearest second and shown as m:ss; if the rounding reaches 60 seconds it rolls over to the next minute. Speed is mph = distance ÷ (time ÷ 60), rounded to two decimals, or km/h on metric. On metric the tool also shows the pace per mile, from miles = km ÷ 1.609344, so the same run gives the same pace per mile in either system. Both time and distance must be above zero. The time box does not accept hours or a m:ss format, so convert first: 1 h 5 min is 65 and 42 min 30 s is 42.5.

Worked example

You ran 5 miles in 42 minutes 30 seconds, which is 42.5 decimal minutes (30 s = 0.5 min). Pace: 42.5 ÷ 5 = 8.5 minutes per mile. The 0.5 is 30 seconds, so the pace is 8:30 /mi. Speed: 5 ÷ (42.5 ÷ 60) = 5 ÷ 0.7083 = 7.06 mph. Holding this pace for a 13.1-mile half marathon would take about 111 minutes.

Try this example →

Common mistakes

  • Typing the time as 42.30 for 42 minutes 30 seconds. The field is decimal minutes, so that means 42.3 minutes (42:18), and the pace reads 8:28 instead of 8:30.
  • Entering hours and minutes in the time box, such as 1.25 for 1 h 25 min. 1.25 means one minute fifteen seconds; type 85.
  • Entering kilometers while the unit system is on US units. A 10 km run typed as 10 is read as 10 miles; switch the unit system to metric, or enter 6.21 miles.
  • Reading the pace as a decimal. 8:30 means 8 minutes 30 seconds, not 8.30 minutes.
  • Expecting an even pace. The result is an average over the whole run, so the fastest and slowest miles will be different.

About this calculator

Pace per mile expresses running speed as the time it takes to cover one mile, given in minutes and seconds (min:sec/mile), and is calculated by dividing total run time by total distance in miles. It is the standard unit runners in the US, UK, and other imperial-measurement countries use to plan and evaluate training, since it is more intuitive during a run than raw speed.

Runners, running coaches, and race organizers rely on pace per mile to set training zones (easy, tempo, threshold, interval pace), to pace a race evenly (negative or even splits), and to compare performance across different distances using tools like Riegel's formula for race-time prediction. GPS running watches and apps display live pace per mile as the primary real-time feedback metric during a run.

Divide a run's time by its distance in miles and you get pace per mile in min:sec plus speed in mph, ready to hold against a training plan or race target. Switch the unit system to metric to enter kilometers: you then get the pace per km, the pace per mile beside it, and the speed in km/h.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

The mph line is what a treadmill set in miles shows, and it follows from the pace: 60 divided by the pace in decimal minutes. A 30-minute 4-mile run is 7:30 per mile, which is 8.00 mph. The pace is rounded to the nearest second. If your watch reports kilometers, convert the distance to miles first. Which pace are you aiming for in your next race?

Comments

  • Be the first to comment.

Popular calculators

All Calculators