Shoe Size by Foot Length Calculator

Measure your foot, get your size.

Result

41.0
8.7
9.7
7.7

How it is calculated

The tool follows ISO 19407:2023, clause 4.2, which converts the foot length to each system; in each formula two sizes are added to allow for a shoe being longer than the foot. With lf the foot length in millimeters (the centimeters you enter × 10):

EU = (lf + 2 × 6.67) ÷ 6.67, as EU (Paris point) sizes step by 6.67 mm, two thirds of a centimeter, from zero

UK = (lf + 2 × 8.47) ÷ 8.47 − 25, as UK sizes step by 8.47 mm, about a third of an inch

US men = UK + 1 and US women = UK + 2: the standard says the US system is the UK one with one size added for men's footwear and usually two for women's.

The foot length is measured from the heel to the tip of the longest toe. All four sizes are shown to 1 decimal and are not rounded to a half size; the standard's labeling table (Table 2) marks a 265 mm foot, which the formulas put at EU 41.7, UK 8.3 and US men's 9.3, as EU 41.5, UK 8.5 and US men's 9.5. Only lengths from 19.5 to 40.6 cm are accepted: below 19.5 cm the UK size would fall under 0, and 40.6 cm is just above the largest foot on record, 40.55 cm (Guinness World Records, 2018). Shorter or longer values show no result. The result does not include shoe-style allowances.

Worked example

The foot measures 26 cm, which is 260 mm. EU: (260 + 2 × 6.67) ÷ 6.67 = 273.34 ÷ 6.67 = 40.98, shown as 41.0. UK: (260 + 2 × 8.47) ÷ 8.47 − 25 = 276.94 ÷ 8.47 − 25 = 32.697 − 25 = 7.697, shown as 7.7. US men: one size above UK, 8.7. US women: two sizes above UK, 9.7. In practice you would choose the nearest size the brand offers, such as EU 41 or 42.

Try this example →

Common mistakes

  • Measuring the shoe or the outside of the foot instead of the foot itself. Measure heel to tip of the longest toe, standing, on paper.
  • Entering the length in millimeters (260) or inches. The field is centimeters, and 260 is outside the 19.5 to 40.6 cm range, so no result appears.
  • Measuring only one foot. Feet often differ, so use the longer one.
  • Treating the output as exact for every brand. Brands and shoe shapes differ, and a size like 8.7 has to be rounded to a real size in the brand's chart.
  • Mixing men's and women's US sizes. The two scales differ by one full size, so check which row you are reading.

Sources

About this calculator

Shoe sizing systems are built around measured foot length, but the three major systems scale that length differently: EU (Paris point) sizing increments by 2/3 of a centimeter per size and adds a fixed manufacturing allowance to the raw foot length, while US and UK sizing use their own separate scales historically based on barleycorns (1/3 inch), with the US scale offset from the UK scale by roughly one full size. These systems were never unified internationally, which is why converting between them from a single physical measurement, rather than trusting a size label from one system to translate directly to another, gives more reliable results.

Podiatrists, shoe retailers, and online shoppers rely on foot-length-based conversion, typically measured the way a Brannock device does, heel to longest toe, because a labeled size in one country's system doesn't map to a fixed size in another once brand-to-brand and last-shape variation is added on top of the base system differences.

Was this helpful?

You can pick up to 3 reactions.

Comments

  • Be the first to comment.

Popular calculators

All Calculators