Shoe Size to Length Converter

Enter a US men's shoe size or a foot length to convert.

How it is calculated

The tool follows ISO 19407:2023, clause 4.2. Sizes step by 8.47 mm of foot length, and a UK adult size is UK = (foot length + 2 × 8.47) ÷ 8.47 − 25, where the two sizes added allow for the difference between foot and last length and 25 stands for the 12 sizes in the 4-inch start plus the 13 children's sizes. The US system is the UK one with one size added for men's footwear, so US men = (length + 16.94) ÷ 8.47 − 24 and, the other way, length (mm) = 8.47 × (size + 24) − 16.94 = 8.47 × size + 186.34. It also shows the length in centimeters (mm ÷ 10) and inches (mm ÷ 25.4). Sizes are given to one decimal and are not rounded to the half sizes that shops sell. Adult sizes only: a size below 1 or above 26, or a length that gives one, shows no result; US men's 26 (a 406.6 mm foot) is about the largest foot on record, 40.55 cm (Guinness World Records, 2018). For women's shoes the standard says the US size is usually two above the UK size, so a women's 8 is a different foot length from a men's 8.

Worked example

Your foot measures 265 mm and you want the US men's size. ISO 19407 gives the UK size as (265 + 2 × 8.47) ÷ 8.47 − 25 = 281.94 ÷ 8.47 − 25 = 33.287 − 25 = 8.287, and US men's sizes are one above UK: 9.287, shown as 9.3 (US men). The same length is 265 ÷ 10 = 26.5 cm and 265 ÷ 25.4 = 10.43 in. Shoes are sold in half sizes, so a shop would suggest 9 or 9.5 depending on how the brand fits; the standard's own labeling table puts a 265 mm foot at US men's 9.5.

Try this example →

Common mistakes

  • Choosing the wrong direction. A value of 10 as a length would be 10 mm, and as a size it means size 10; read the direction setting before you press convert.
  • Entering the length in centimeters or inches. The length-to-size direction expects millimeters, so 26.5 gives no result and 265 is right.
  • Using the result for women's or EU sizes. The scale is for US men's sizing, so a women's 8 is a different foot length from a men's 8.
  • Measuring the shoe instead of the foot. The length is a foot length, and a shoe is cut longer to leave room for the toes.
  • Trusting the result as a fit guarantee across brands. It is the ISO 19407 conversion, and each maker's lasts differ.

Sources

About this calculator

US men's shoe sizes step by 8.47 mm (1/3 inch) of foot length per full size. ISO 19407:2023 ties the size systems together through foot length: a UK adult size is (foot length + 2 × 8.47) ÷ 8.47 − 25, the two extra sizes allowing for a shoe being longer than the foot, and US men's sizes run one size above UK, so a US men's 10 corresponds to a foot of about 271 mm.

Because online shoe shopping removes the chance to try before buying, converting between a size and a length in millimeters, centimeters or inches lets shoppers measure their actual foot and find the closest matching size across brands, or go the other way to see what foot length a given size assumes — useful for shoe retailers, resellers listing used shoes, and anyone comparing sizing across international scales.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

A length from the length-to-size direction is a foot measurement, and a shoe needs to be longer than the foot, since toes want a little room at the end. Measure heel to longest toe in millimeters, with your weight on the foot, then compare the converted size with the brand's own chart instead of treating it as the final answer. Which brand's chart disagrees most with the figure you get here?

Comments

  • Be the first to comment.

Popular calculators

All Calculators