Roast Cooking Time Calculator

Pick the cut and enter its weight to get the USDA roasting time and the safe internal temperature.

How it is calculated

The weight in kilograms is converted to pounds (lb = kg ÷ 0.45359237) and read to one decimal. Each cut has a row in the USDA FSIS Holiday Meat Roasting Chart: oven temperature, weight range and time. Per-pound rows give lb × low rate to lb × high rate, rounded to whole minutes: beef rib roast, bone-in, 4–8 lb, 325 °F, 23–30 min/lb; beef eye round 2–3 lb, 325 °F, 20–22 min/lb; lamb leg, bone-in 5–9 lb or boneless 4–7 lb, 325 °F, 20–26 min/lb; lamb crown roast 3–4 lb, 375 °F, 20–30 min/lb; pork loin, bone-in 3–5 lb, 325 °F, 20–25 min/lb; pork loin, boneless 2–4 lb, 325 °F, 23–33 min/lb; pork crown roast 6–10 lb, 325 °F, 20–25 min/lb; veal, boneless rump or shoulder 2–3 lb, 325 °F, 25–30 min/lb; veal loin, bone-in 3–4 lb, 325 °F, 30–34 min/lb; venison 3–4 lb, 325 °F, 20–25 min/lb. Total-time rows, where the time does not grow with weight: whole beef tenderloin 4–6 lb 45–60 min, half 2–3 lb 35–45 min, pork tenderloin ½–1½ lb 20–30 min, all at 425 °F. Outside a cut's weight range no time is shown, because FSIS gives none. Every result states the FSIS safe minimum internal temperature: 145 °F (63 °C) and a rest of at least 3 minutes for beef, pork, veal and lamb roasts, 160 °F (71 °C) for venison as the chart lists, and for other meats ground meat 160 °F and all poultry 165 °F (74 °C). The oven in °C is (°F − 32) × 5/9, rounded.

Worked example

A 2.5 kg bone-in beef rib roast. In pounds: 2.5 ÷ 0.45359 = 5.5 lb, inside the FSIS range for this cut (4 to 8 lb). The chart gives 23 to 30 minutes per pound at 325 °F: 5.51 × 23 = 127 minutes and 5.51 × 30 = 165 minutes, shown as 2 h 7 min – 2 h 45 min. Start checking with a food thermometer at the low end; the roast is safe at 145 °F (63 °C) followed by a rest of at least 3 minutes before carving.

Try this example →

Common mistakes

  • Taking the time as the finish line. FSIS calls the chart approximate; the thermometer reading decides.
  • Aiming for a doneness below the safe minimum. FSIS's minimum for beef, pork, veal and lamb roasts is 145 °F with a 3-minute rest; you may cook to a higher temperature, which takes longer than the chart.
  • Roasting below 325 °F. FSIS does not recommend lower oven temperatures, because the meat stays too long between 40 and 140 °F.
  • Entering pounds in the kilogram box; 5.5 lb is 2.5 kg.
  • Using this chart for ham, turkey or meat loaf. Hams and turkey have their own FSIS tables (see the ham and turkey tools), and ground meat must reach 160 °F.
  • Starting from frozen or from room temperature. FSIS's beef and lamb charts base their times on meat at refrigerator temperature, 40 °F (4 °C).

Sources

About this calculator

This calculator reads the USDA Food Safety and Inspection Service (FSIS) Holiday Meat Roasting Chart. For each cut of fresh beef, lamb, pork, veal and venison the chart gives an oven temperature, a weight range and a time, usually in minutes per pound: a bone-in beef rib roast of 4 to 8 lb, for example, takes 23 to 30 minutes per pound at 325 °F (163 °C). Enter the weight in kilograms and pick the cut; the tool converts the weight to pounds and shows the time range. Tenderloins are roasted hot and fast, so their time is a total that does not grow with weight. Outside a cut's weight range FSIS gives no time and neither does the tool.

Every result states the safe minimum internal temperature from FSIS: 145 °F (63 °C) for beef, pork, veal and lamb roasts, then a rest of at least 3 minutes before carving; 160 °F (71 °C) for venison, as the chart lists; ground meat 160 °F and all poultry 165 °F (74 °C). The times are approximate, so start checking with a food thermometer at the low end of the range. Hams and turkeys have their own FSIS tables in the ham and turkey tools.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

The times here are the USDA roasting chart for each cut, and USDA calls them approximate: heat travels through the thickness of a joint, so a long thin cut finishes sooner than a compact one of the same weight. Start probing at the low end of the range. Beef, pork, veal and lamb roasts are safe at 145 degrees F (63 degrees C) followed by a 3-minute rest; ground meat needs 160 degrees F and poultry 165 degrees F. Which cut are you roasting?

Comments

  • Be the first to comment.

Popular calculators

All Calculators