Ham Cooking Time Calculator

Pick the type and cut of ham and enter its weight.

How it is calculated

The weight is converted to pounds, lb = kg ÷ 0.45359237, and multiplied by the FSIS minutes per pound for the cut: time = lb × low to lb × high, rounded to the minute and shown as hours and minutes. The rates, for an oven at 325 °F, are: cook-before-eating whole bone-in 18–20 (10–14 lb), half bone-in 22–25 (5–7 lb), shank or butt portion 35–40 (3–4 lb), arm picnic shoulder 30–35 (5–8 lb), shoulder roll 35–40 (2–4 lb); cooked whole bone-in 15–18 (10–14 lb), half bone-in 18–24 (5–7 lb), arm picnic shoulder 25–30 (5–8 lb), canned 15–20 (3–10 lb), vacuum packed 10–15 (6–12 lb), spiral cut 10–18 (7–9 lb); fresh whole leg bone-in 22–26 (12–16 lb), whole leg boneless 24–28 (10–14 lb), half bone-in 35–40 (5–8 lb). A weight outside the cut's range, read to one decimal of a pound, gets no time. The temperature line is the FSIS one for the type of ham.

Worked example

A cooked, bone-in half ham weighs 3 kg, which is 3 ÷ 0.45359 = 6.6 lb, inside the FSIS range of 5 to 7 lb for that cut. FSIS gives 18 to 24 minutes per pound at 325 °F:

  1. 6.61 × 18 = 119 min = 1 h 59 min
  2. 6.61 × 24 = 159 min = 2 h 39 min

If it was packaged in a USDA-inspected plant, it is ready to serve hot at 140 °F (60 °C). The same weight of fresh, uncured half ham would need 35 to 40 minutes per pound, 3 h 51 min to 4 h 25 min, and 145 °F (63 °C) with a 3-minute rest.

Try this example →

Common mistakes

  • Picking the wrong type. A ham labeled "cook thoroughly" or "fresh" is raw and must reach 145 °F; only a ham labeled cooked or ready-to-eat is just being reheated.
  • Serving by the clock. Check the thickest part with a food thermometer, away from the bone.
  • Reheating a shop-repackaged or leftover cooked ham only to 140 °F. Those need 165 °F (74 °C).
  • Skipping the 3-minute rest for a fresh or cook-before-eating ham.
  • Entering pounds in the kilogram box: 6.6 lb is about 3 kg.
  • Expecting a time for a weight FSIS does not list for that cut. Use the thermometer and the cut's nearest guidance, or the label's instructions.

Sources

About this calculator

This calculator uses the USDA Food Safety and Inspection Service (FSIS) timetable for cooking ham in an oven set to 325 °F (163 °C). FSIS gives minutes per pound by type and cut, each for a weight range: a cooked whole bone-in ham takes 15 to 18 minutes per pound at 10 to 14 lb, a cooked half 18 to 24, a cook-before-eating whole ham 18 to 20, and a fresh, uncured half ham 35 to 40. Choose your ham, enter the weight in kilograms, and the tool converts it to pounds and multiplies by that range. If the weight is outside the range FSIS lists for the cut, no time is given, because FSIS gives none.

The time is a guide; the temperature decides. Fresh hams and cook-before-eating hams must reach 145 °F (63 °C) on a food thermometer, then rest for at least 3 minutes. Cooked hams can be eaten cold; to serve them hot, reheat those packaged in a USDA-inspected plant to 140 °F (60 °C) and any other cooked ham, such as one repackaged in a shop or leftovers, to 165 °F (74 °C). Country hams are soaked and then boiled, following the maker's instructions, and are not covered here.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

Work backwards from serving time to decide when the oven goes on. For a 3 kg cooked half ham the USDA table gives 1 h 59 min to 2 h 39 min at 325 °F, so for a 6 pm meal it should be in by about 3:20 pm. Start checking early: a cooked ham from a USDA-inspected plant is ready at 140 °F, a fresh or cook-before-eating one needs 145 °F and a 3-minute rest. Bone-in or boneless, how did your timing compare?

Comments

  • Be the first to comment.

Popular calculators

All Calculators