ABW from ABV Calculator

Enter the alcohol by volume (% ABV) to get the alcohol by weight (% ABW).

How it is calculated

Enter the strength as a percentage by volume, ABV, from 0 to 100. The tool looks it up in Table 6 of NBS Circular 19 (1924), percentages by weight for each whole percentage by volume at 60 °F in mixtures of ethyl alcohol and water. Between two whole percentages it interpolates in a straight line: ABW = ABW(n) + (ABV − n) × (ABW(n+1) − ABW(n)), with n the whole number below. The answer is shown as a percentage with two decimals.

The ratio ABW ÷ ABV is not constant: it is about 0.795 for weak mixtures, 0.834 at 40% and exactly 1 at 100%, because ethanol is less dense than water and so is a strong mixture. Values below 0 or above 100 return no result. The table is for alcohol and water only; the sugar and extract in a real beverage, and its temperature, shift the true figure slightly.

Worked example

A beer labeled 5% ABV. The NBS table row for 5% by volume reads 3.998% by weight, so the result is 4.00% ABW. A wine at 12.5% ABV lies halfway between the rows for 12% (9.679) and 13% (10.497): 9.679 + 0.5 × 0.818 = 10.088, shown as 10.09%. A 40% spirit gives 33.36%, a higher share than the 5% beer because the ratio grows with strength.

Try this example →

Common mistakes

  • Comparing an ABW figure with an ABV figure directly. A beer at 4% ABW is about 5% ABV, so the same drink looks weaker or stronger depending on which scale is quoted.
  • Using a single factor such as 0.79 for spirits. The ratio grows with strength, so a fixed factor gives 31.7% for a 40% spirit instead of the table's 33.4%.
  • Entering the value as a fraction, such as 0.05 for 5%. The tool expects the percentage number itself and would give 0.04%.
  • Treating the result as exact for beer, wine or liqueur. The table is for alcohol and water; dissolved sugar and extract change the density.
  • Confusing ABW with proof. Proof is a separate scale and is not what this tool returns.

Sources

About this calculator

This calculator converts alcohol by volume (ABV) to alcohol by weight (ABW) with Table 6 of the US Bureau of Standards Circular 19, which lists the percentage by weight for every whole percentage by volume at 60 °F in mixtures of ethyl alcohol and water; values in between are interpolated. Since alcohol is lighter than water, a given percentage by volume always corresponds to a smaller percentage by weight, but not by a fixed factor: 5% ABV is 3.998% ABW (a ratio of about 0.80), while 40% ABV is 33.364% ABW (about 0.83), because a strong mixture is itself less dense than water.

Brewers use this conversion because US beer labeling has historically shown ABW while most of the world (and most consumers) think in ABV, so the two figures need to be reconciled to compare beers across labeling conventions or meet a state's specific alcohol-content disclosure rules. The table describes alcohol and water only: sugar and other dissolved solids in beer, wine or liqueur change the drink's density, so for those treat the result as an approximation.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

The ratio between the two scales is not fixed: it grows with strength, because a strong mixture is less dense than water. A 40 percent ABV spirit is 33.36 percent ABW in the NBS table used here, while a single beer-style factor would give about 31.7. If a US recipe or label quotes ABW, convert it back before comparing with ABV strengths elsewhere. Which drink are you converting?

Comments

  • Be the first to comment.

Popular calculators

All Calculators