Road Trip Fuel Cost Calculator

Enter your trip distance, fuel economy, and fuel price to estimate cost.

How it is calculated

Fuel needed comes from distance and efficiency, and cost is fuel times price. With US units: gallons = distance ÷ mpg, cost = gallons × price, cost per mile = cost ÷ distance, where distance is in miles for the whole trip, mpg is miles per US gallon and price is the price of one US gallon. With the unit system set to metric: liters = km × L/100 km ÷ 100, cost = liters × price per liter, cost per km = cost ÷ km. The tool does one leg: for a return journey, enter the round-trip distance. Distance and price may be zero but not negative; the fuel economy must be above zero. Fuel is shown to two decimals and money is rounded to cents, except the cost per km, a small number, shown to four decimals (three from $0.10); the cost per mile keeps two. Efficiency is treated as constant, whereas real economy changes with speed, load and terrain.

Worked example

A 450-mile trip, a car averaging 28 mpg and fuel at 3.80 per gallon. Step 1: gallons needed = 450 ÷ 28 = 16.0714, shown as 16.07 gal. Step 2: fuel cost = 16.0714 × 3.80 = $61.07. Step 3: cost per mile = 61.07 ÷ 450 = about 0.1357, shown rounded as $0.14. For the drive back, double the distance to 900 miles and the total becomes about $122.14.

Try this example →

Common mistakes

  • Typing kilometers or L/100 km while the unit system is on US units. 100 km read as 100 miles is 61% too far, and 7 L/100 km read as 7 mpg is more than four times the fuel; switch the unit system to metric instead.
  • Using the car's best advertised mpg. Fully loaded, with a trailer, roof box or at motorway speeds, real mpg is lower, so the true cost is higher.
  • Forgetting the return leg. The distance field is the total you drive, not the one-way distance.
  • Entering an mpg figure with the unit system on metric. In metric the field is L/100 km, where a bigger number means more fuel, so 30 mpg must be entered as about 7.84.
  • Using a fuel price from home when the route crosses areas with different prices; use an average for the route.

About this calculator

Estimating what a road trip will cost in gas comes down to three numbers: how far you're driving, how efficiently your vehicle burns fuel, and the price at the pump. This calculator combines them with the straightforward formula fuel cost = (distance ÷ mpg) × price per gallon — distance divided by fuel economy gives gallons needed, multiplied by price gives total cost. With the unit system set to metric it takes kilometers, liters per 100 km and the price per liter instead: fuel cost = km × L/100 km ÷ 100 × price per liter.

A 600-mile trip in a car averaging 30 mpg at $3.50 a gallon burns 20 gallons and costs $70. Doubling the distance or halving the mpg (say, towing a trailer) doubles the fuel bill in the same way.

Road trippers and commuters use this to budget a trip in advance, compare the fuel cost of driving versus flying, or judge how much a more fuel-efficient vehicle would actually save on a specific route.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

For a car rated in liters per 100 km, divide 235.2 by that number to get US mpg, which is a quick bridge before you type anything in. To split the cost on a shared trip, divide the fuel cost by the number of people in the car. Would you like kilometers and liters supported directly? Tell us which units you drive in.

Comments

  • Be the first to comment.

Popular calculators

All Calculators