Poisson's Ratio Calculator
Find the ratio of transverse contraction to longitudinal extension in a stretched or compressed material.
Result
How it is calculated
The tool computes ν = −εlateral ÷ εaxial, minus the ratio of the strain across the load to the strain along it; the minus sign accounts for the change of sign between the two strains (Roylance, MIT). Strain is the change in length divided by the original length, a plain number with no unit. Enter both strains in the same form, for example both as fractions or both as percent, and the units cancel. The result has two decimals. Axial strain of zero gives no result. The sign is kept. In a normal tension test the lateral strain is negative while the axial strain is positive, so ν is positive; strains of the same sign give a negative ν, which the tool flags: either the material widens when stretched (an auxetic material) or a sign was typed wrong. The tool does not limit the result, so it will show values the usual 0 to 0.5 range for ordinary solid materials would not allow.
Worked example
A bar is pulled so that its length grows by a strain of 0.0028, and its width shrinks by a strain of −0.00084. Poisson's ratio is minus lateral over axial: −(−0.00084 ÷ 0.0028) = −(−0.30). The tool shows 0.30, in the range typical of many metals. Entering +0.00084 for the lateral strain would give −0.30, and the tool would say that a negative ratio means a material that widens when stretched, or a sign typed wrong.
Common mistakes
- Mixing forms of strain, such as the lateral strain in microstrain (840) and the axial strain as a fraction (0.0028). The ratio is then off by a factor of a million.
- Entering a change in length instead of a strain. A 0.3 mm change is not a strain until it is divided by the original length.
- Entering the lateral strain of a tension test as a positive number. The width shrinks, so the strain is negative; typed as positive it gives a negative ν, which the tool flags.
- Putting the axial strain in the lateral field. The ratio is lateral over axial, and the swap returns the inverse, 3.33 instead of 0.30.
- Ignoring results above 0.5. Nothing is checked, so −0.01 over 0.005 returns 2.00. For an ordinary solid that signals a measurement or entry error.
Sources
- Pressure Vessels (axial stress pr/2b, hoop stress pr/b; Poisson's ratio ν = −lateral/longitudinal strain) — David Roylance, MIT Department of Materials Science and Engineering, 2001 (MIT OpenCourseWare 3.11)
About this calculator
Poisson's ratio (ν, nu), named after French mathematician Siméon Poisson, quantifies how much a material contracts in directions perpendicular to an applied load: it is defined as the negative ratio of transverse (lateral) strain to axial (longitudinal) strain during uniaxial tension or compression. Most engineering metals have a Poisson's ratio near 0.3, incompressible materials like rubber approach the theoretical upper limit of 0.5, and cork is famously close to 0, which is why it can be pushed into a bottle without bulging sideways.
Mechanical, civil, and materials engineers use Poisson's ratio alongside Young's modulus and shear modulus to fully characterize a material's elastic behavior in stress analysis, finite element modeling, and structural design — it directly affects calculations like stress concentration around holes, buckling behavior, and how pressurized pipes or vessels deform.
This calculator takes your measured lateral and axial strain from a tensile or compressive test and computes the resulting Poisson's ratio as minus lateral ÷ axial strain, keeping the sign: a negative ratio, as in auxetic materials, is shown as negative and explained. The result is not checked against the usual 0 to 0.5 range, so judge it against your material yourself.
Was this helpful?
You can pick up to 3 reactions.
Popular calculators
Loan Calculator
Monthly payment, total interest and full amortization schedule.
Percentage Calculator
Percent change, percent of, and ratio calculations.
Discount Calculator
Calculate final price, savings, and discount amount.
BMI Calculator
Body mass index from height and weight (metric or imperial).
Age Calculator
Compute your exact age in years, months and days from a birth date.
Compound Interest Calculator
Calculate the final amount and interest earned with compounding.
All Calculators
- Loan Calculator
- Profit Calculator
- Discount Calculator
- BMI Calculator
- Percentage Calculator
- Ideal Weight Calculator
- Age Calculator
- Pregnancy Due Date Calculator
- Compound Interest Calculator
- BMR Calculator (Basal Metabolic Rate)
- Tip Calculator
- Fuel Cost Calculator
- Date Difference Calculator
- Sleep Cycle Calculator
- Daily Water Intake Calculator
- Simple Interest Calculator
- Heart Rate Zones Calculator
- Running Pace Calculator
- Pet Age Calculator
- Calories Burned Calculator
- Macro Calculator
- TDEE Calculator (Total Daily Energy Expenditure)
- Waist-to-Hip Ratio Calculator
- Honor Roll Calculator
- One Rep Max (1RM) Calculator
- Ovulation Calculator
- Electricity Cost Calculator
- Unit Price Calculator
- Savings Goal Calculator
- Break-Even Point Calculator
- Paint Calculator
- Course Grade Average Calculator
- Business Days Calculator
- Time Duration Calculator
- Fuel Economy Calculator
- Temperature Converter
- Tile Calculator
- Aspect Ratio Calculator
- Roman Numeral Converter
- Goal Weight Timeline Calculator
- Salary Converter (Hourly to Annual)
- Credit Card Validator (Luhn)
- Body Surface Area (BSA) Calculator
- Feels-Like Temperature Calculator
- Ohm's Law Calculator
- PPI (Pixel Density) Calculator
- Molar Mass Calculator
- Zodiac Sign Calculator (Western + Chinese)
- IBAN Validator
- Shoe Size Converter
- Country Info & Dialing Code Lookup
- Time Zone Difference (World Clock)
- CAGR (Compound Annual Growth Rate) Calculator
- Rule of 72 Calculator
- Blood Alcohol Content (BAC) Calculator
- Lean Body Mass (LBM) Calculator
- Pythagorean Theorem Calculator
- Speed Converter
- Download Time Calculator
- Date Calculator (Add/Subtract)
No calculators found
Comments