Passphrase Generator

Pick a word count and separator to generate a passphrase; add a seed only if you need to reproduce it.

How it is calculated

Each word is drawn from a built-in list of 1,583 common English words, so every word carries log2(1583) ≈ 10.63 bits. With the seed field empty, every word is drawn with a cryptographically secure random generator and each run gives a new phrase. With a seed typed in, word number i is list[crc32(seed + ":" + i) mod 1583], so the same seed, word count and separator always rebuild the same phrase; that mode is for demos and tests only. Word count is a whole number from 1 to 12 (empty means 4; 2.5 or 13 gives no result). The separator is hyphen (default), space or dot. Entropy is words × log2(1583) and assumes an unseeded, uniform draw; it ignores the separator. With a seed the tool shows no entropy figure and says instead that the phrase is only as strong as the seed.

Worked example

This sample run uses the seed correct horse, 4 words and the hyphen separator. For i = 0 to 3 the tool takes the CRC-32 of "correct horse:0", "correct horse:1" and so on, and reduces each modulo 1,583: that gives list positions 712, 1020, 1107 and 331, the words kernel, pizza, rain and desert. The result is kernel-pizza-rain-desert, shown as 4 words. No entropy figure is given, because a seeded phrase adds no randomness: it is only as strong as the seed. The space separator gives "kernel pizza rain desert". With the seed left empty you would get four different, unpredictable words each time, and an entropy of 4 × 10.63 = 42.5 bits.

Try this example →

Common mistakes

  • Typing a seed for a real password. A seeded phrase is fully determined by the seed, so anyone who guesses it (a name, a date, "demo") can rebuild the phrase, which is why the tool shows no entropy figure for it. Leave the seed empty for a real password.
  • Expecting a seed spelled slightly differently to give a similar phrase. Even a capital letter or a space changes every word, so write the seed down exactly if you need to reproduce it.
  • Treating 42.5 bits as strong for a high-value account. Four words from a 1,583-word list are fine for a throwaway login but weak against offline guessing; the tool needs about six words to reach roughly 64 bits.
  • Using the result as a crypto-wallet recovery phrase. Wallets expect their own word list and checksum, so use the wallet's own generator.
  • Entering 0 or more than 12 words, or a decimal. The word count must be a whole number from 1 to 12, otherwise no phrase is shown.

Sources

About this calculator

With the seed field left empty, this generator picks each word with a cryptographically secure random number generator from a built-in list of 1,583 common English words, so every run gives a new phrase. If you type a seed, the choice becomes deterministic: the same seed, word count and separator always reproduce the same phrase — handy for demos and tests, but anyone who knows the seed can rebuild it, so never seed a real password. Strength is reported as entropy = log2(1,583) × number of words, about 10.6 bits per word, following the same logic as the well-known Diceware method.

A memorable multi-word phrase like “correct-horse-battery-staple” is typically easier to recall and, at sufficient word count, harder to brute-force than a short string of random symbols. Four words give about 42 bits; security-conscious users and sysadmins choosing a master password usually want six or more words (about 64 bits). For a crypto-wallet recovery phrase use the wallet's own BIP39 generator, not a general passphrase tool.

Was this helpful?

You can pick up to 3 reactions.

Comments

  • Be the first to comment.

Popular calculators

All Calculators