Nanometers to Angstroms Converter

Enter a length in nanometers to convert to ångströms and picometers.

How it is calculated

Both units are exact powers of ten of the meter (1 nm = 10−9 m, 1 Å = 10−10 m, 1 pm = 10−12 m), so the conversion is just a shift of the decimal point: Å = nm × 10 and pm = nm × 1000. The input is a length in nanometers. Both results are rounded to two decimals, and a result that would round to 0.00 keeps its significant digits: 0.0004 nm shows as 0.004 Å and 0.40 pm. A negative number gives no result, since a length cannot be below zero, and no upper limit is applied. To go the other way, divide by 10 for ångströms to nanometers and by 1000 for picometers to nanometers.

Worked example

A typical carbon–carbon single bond is about 0.154 nm long. In ångströms: 0.154 × 10 = 1.54 Å. In picometers: 0.154 × 1000 = 154.00 pm. Both lines describe the same distance, so a crystallography paper quoting 1.54 Å and a chemistry text quoting 154 pm agree. For comparison, 550 nm of visible light would be 5,500 Å.

Try this example →

Common mistakes

  • Multiplying by 100 instead of 10. 1 nm is 10 Å; the factor 100 relates ångströms to picometers (1 Å = 100 pm).
  • Confusing ångström with picometer, since atomic distances then differ by a factor of 100. A bond of 1.54 Å and 154 pm are the same, but 1.54 pm is not.
  • Reading the two-decimal result for tiny inputs as exact. A tiny input keeps three significant digits (0.0004 nm: 0.004 Å), and the picometer line gives sub-ångström lengths in a handier unit.
  • Typing the value in micrometers or meters. The input is nanometers only, so 0.154 µm must be entered as 154.

Sources

About this calculator

This converter translates a length in nanometers into ångströms using the fixed relationship 1 nm = 10 Å (and equivalently 1 Å = 100 picometers), since both units are decimal fractions of a meter — a nanometer is 10⁻⁹ m and an ångström is 10⁻¹⁰ m.

The ångström, named after physicist Anders Jonas Ångström, remains the everyday unit for atomic radii, bond lengths and X-ray/crystal-lattice spacings even though it isn't an SI unit, because typical atomic distances (roughly 0.5–3 Å) come out as small, easy-to-handle numbers instead of awkward fractions of a nanometer (0.05–0.3 nm). Chemists, crystallographers and semiconductor engineers switch between nanometers and ångströms constantly depending on whether they're describing a device feature or an individual bond.

Was this helpful?

You can pick up to 3 reactions.

Comments

  • Be the first to comment.

Popular calculators

All Calculators