Moon Phase Calculator

Discover the moon phase, illumination percentage, and lunar age for any date you choose.

How it is calculated

The date (YYYY-MM-DD) is turned into a Julian Day Number, the Julian Day at 12:00 UTC of that date, so the result stands for the middle of the day. The tool measures the days elapsed since a known new moon (January 6, 2000, 18:14 UTC) and takes the remainder after dividing by the mean synodic month of 29.53058867 days; that remainder is the moon's age. The four principal phases are instants: the new moon at age 0, the first quarter at a quarter of the month (7.38 days), the full moon at half (14.77 days) and the last quarter at three quarters (22.15 days). The tool gives one of these names only within one day of that age; in between it names a waxing or waning crescent (less than half lit) or a waxing or waning gibbous moon (more than half lit). Illumination is (1 − cos(2π × age ÷ 29.53)) ÷ 2 × 100. Because it uses an average month length, real phase times can differ by up to about a day, and the moment of day is not considered.

Worked example

Pick January 13, 2025 (sent as 2025-01-13). The days since the reference new moon, taken modulo 29.53058867, give an age of 13.8 days. The full moon falls at half the month, 14.77 days, and 13.8 days is within one day of it, so the phase is the full moon. Illumination: (1 − cos(2π × 0.47)) ÷ 2 = 98.92%. The result is Full Moon, 98.92% lit, age 13.8 days.

Try this example →

Common mistakes

  • Mixing up day and month in the date field, whose display order follows your browser (03/04 can be March 4 or April 3); check the field shows the intended day before reading the result.
  • Expecting a precise astronomical event time. The tool uses an average cycle, so the phase for dates close to a quarter or full moon can be off by a day.
  • Expecting illumination to read exactly 100% at full moon. It changes smoothly with the age, so even on the full-moon day it is usually a little below 100%, as in this example.
  • Ignoring the time zone and hemisphere. The date is taken at 12:00 UTC, and the moon's tilt as seen from the southern hemisphere is mirrored.

Sources

About this calculator

This calculator finds the moon phase, illumination percentage, and moon age (days since the last new moon) for any date, based on the 29.53-day synodic month referenced to a known new moon in January 2000.

Astronomers and stargazers use it to plan observation nights around a dark, moonless sky; photographers time full-moon shots with it; gardeners follow moon-phase planting traditions; and it's also handy for anyone tracking lunar calendar events tied to a specific moon phase.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

For planning a dark-sky night, look for dates a few days either side of the new moon, where illumination stays low. Note the tool works from an average cycle and treats each date at 00:00 UTC, and it does not tell you when the moon rises or sets, which matters as much as the phase. Check an almanac for the exact times. What do you plan to shoot or observe?

Comments

  • Be the first to comment.

Popular calculators

All Calculators