Modified Shock Index Calculator
Enter heart rate and systolic and diastolic blood pressure.
Result
How it is calculated
The tool first finds the mean arterial pressure from the cuff reading: MAP = (SBP + 2 × DBP) / 3, in mmHg, where SBP is systolic and DBP is diastolic pressure. Then MSI = HR / MAP, with heart rate HR in beats per minute. MSI has no unit and is shown with two decimals. The category is taken from that rounded value: below 0.7 is labeled "Below 0.7", 0.7 to 1.3 inclusive "0.7–1.3 (lower-mortality band, Liu 2012)" and above 1.3 "Above 1.3". These are the cut-offs Liu et al. (2012) picked from one hospital's curve of MSI against mortality: values on either side of the band went with higher mortality. They are not a normal range. Heart rate and both pressures must each be between 1 and 400, and the diastolic must be below the systolic; otherwise no result appears. The label is a screening aid only; it ignores age, medication, pregnancy and the clinical picture, and it is not medical advice.
Worked example
A patient has a heart rate of 88 bpm and a blood pressure of 120/80 mmHg. The mean arterial pressure is (120 + 2 × 80) / 3 = 280 / 3 = 93.3 mmHg. The modified shock index is 88 / 93.33 = 0.94. That lies between 0.7 and 1.3, the band with the lower mortality in Liu et al. (2012), so the tool labels it "0.7–1.3 (lower-mortality band, Liu 2012)". For comparison, a heart rate of 130 with 90/50 gives a MAP of 63.3 mmHg and an MSI of 2.05, which is labeled "Above 1.3 (higher mortality in Liu 2012)".
Common mistakes
- Entering the MAP in the diastolic box, or pulse pressure (systolic minus diastolic) as the diastolic value. The tool calculates MAP itself from SBP and DBP.
- Swapping systolic and diastolic. If the diastolic value is not below the systolic one, the tool shows no result; check the order before reading anything into a missing result.
- Confusing MSI with the classic shock index (HR divided by systolic pressure). The two use different denominators, so their values cannot be compared.
- Reading the 0.7–1.3 band as normal or as reassurance. It is the band with the lower mortality in one retrospective study, it covers everything from 0.7 to 1.3, and a single reading says nothing about a trend; repeated measurements matter more.
- Entering a heart rate from a pulse oximeter or a moving patient without checking it. A wrong HR changes the index in direct proportion.
Sources
- Modified shock index and mortality rate of emergency patients — World Journal of Emergency Medicine, 2012
About this calculator
The Modified Shock Index (MSI) is heart rate divided by mean arterial pressure (MAP), where MAP itself is calculated as diastolic pressure plus one-third of the pulse pressure (systolic minus diastolic). The tool shows the cut-offs of one study, Liu et al. (2012), a retrospective review of 22,161 emergency patients at one hospital in Beijing: the authors picked 0.7 and 1.3 from the curve of MSI against mortality, and patients above 1.3 (a hypodynamic state) and below 0.7 (a hyperdynamic state) both had higher mortality than those in between. The tool calls the middle band the lower-mortality band of that study; the study gives no normal range, and its authors ask for prospective confirmation.
In that study MSI predicted mortality better than heart rate or blood pressure alone, which is why it is studied as a triage aid in emergency medicine. This tool is for reference and education only, not medical advice.
Was this helpful?
You can pick up to 3 reactions.
Comments
- Be the first to comment.
Popular calculators
Loan Calculator
Monthly payment, total interest and full amortization schedule.
Percentage Calculator
Percent change, percent of, and ratio calculations.
Discount Calculator
Calculate final price, savings, and discount amount.
BMI Calculator
Body mass index from height and weight (metric or imperial).
Age Calculator
Compute your exact age in years, months and days from a birth date.
Compound Interest Calculator
Calculate the final amount and interest earned with compounding.
All Calculators
- Loan Calculator
- Profit Calculator
- Discount Calculator
- BMI Calculator
- Percentage Calculator
- Ideal Weight Calculator
- Age Calculator
- Pregnancy Due Date Calculator
- Compound Interest Calculator
- BMR Calculator (Basal Metabolic Rate)
- Tip Calculator
- Fuel Cost Calculator
- Date Difference Calculator
- Sleep Cycle Calculator
- Daily Water Intake Calculator
- Simple Interest Calculator
- Heart Rate Zones Calculator
- Running Pace Calculator
- Pet Age Calculator
- Calories Burned Calculator
- Macro Calculator
- TDEE Calculator (Total Daily Energy Expenditure)
- Waist-to-Hip Ratio Calculator
- Honor Roll Calculator
- One Rep Max (1RM) Calculator
- Ovulation Calculator
- Electricity Cost Calculator
- Unit Price Calculator
- Savings Goal Calculator
- Break-Even Point Calculator
- Paint Calculator
- Course Grade Average Calculator
- Business Days Calculator
- Time Duration Calculator
- Fuel Economy Calculator
- Temperature Converter
- Tile Calculator
- Aspect Ratio Calculator
- Roman Numeral Converter
- Goal Weight Timeline Calculator
- Salary Converter (Hourly to Annual)
- Credit Card Validator (Luhn)
- Body Surface Area (BSA) Calculator
- Feels-Like Temperature Calculator
- Ohm's Law Calculator
- PPI (Pixel Density) Calculator
- Molar Mass Calculator
- Zodiac Sign Calculator (Western + Chinese)
- IBAN Validator
- Shoe Size Converter
- Country Info & Dialing Code Lookup
- Time Zone Difference (World Clock)
- CAGR (Compound Annual Growth Rate) Calculator
- Rule of 72 Calculator
- Blood Alcohol Content (BAC) Calculator
- Lean Body Mass (LBM) Calculator
- Pythagorean Theorem Calculator
- Speed Converter
- Download Time Calculator
- Date Calculator (Add/Subtract)
No calculators found
Note from the editors
This index divides heart rate by mean arterial pressure, so it is not the same number as the older heart rate over systolic pressure index. Compare values with published cut-offs only if they use the same definition. One reading is a snapshot and cuff error moves it, so a clinician would look at the trend and the person, not the number alone. Do you usually work with this version or the systolic one?