Hay Cost Per Ton Calculator

Enter the price per bale and bale weight to get cost per ton.

How it is calculated

The tool turns a per-bale price into comparable figures for two tons. On US units the weight is in pounds and the US ton is 2,000 lb: cost per US ton is price ÷ (weight ÷ 2000), cost per pound is price ÷ weight, and bales per US ton is 2000 ÷ weight. The metric ton is 1,000 kg (about 2,205 lb): cost per metric ton is price ÷ (kg ÷ 1000), cost per kg price ÷ kg and bales per metric ton 1000 ÷ kg, shown on both unit systems (pounds are converted with 1 lb = 0.45359237 kg). With the unit system set to metric, the bale weight is in kilograms and only the metric figures are shown. Price is the dollars for one bale. Money is shown in dollars rounded to cents, so a cost per pound of only a few cents loses precision and the per-ton figure is the better one to compare. A weight of zero or less, or a negative price, shows no result.

Worked example

A small square bale weighing 50 lb costs $9.00. Tons per bale: 50 ÷ 2,000 = 0.025. Cost per ton: 9 ÷ 0.025 = $360.00. Cost per pound: 9 ÷ 50 = $0.18. Bales per ton: 2,000 ÷ 50 = 40.00. Compare that with a 900 lb round bale at $60.00, which works out to $133.33 per ton, so the round bale is much cheaper per ton even though it costs more per bale.

Try this example →

Common mistakes

  • Comparing prices per bale without checking weights. A $60 round bale can be far cheaper per ton than a $9 small square one, which is exactly what the per-ton figure shows.
  • Typing kilograms while the unit system is on US units. A 25 kg bale read as 25 lb makes the cost per ton about double the real value; choose metric to enter kilograms, or enter about 55 lb.
  • Mixing up the two tons. A US ton is 2,000 lb and a metric ton 1,000 kg (about 2,205 lb), so a quote per metric ton must be compared with the metric ton line, which is about 10% higher than the US ton figure for the same hay.
  • Using a rounded or guessed bale weight. A few pounds either way moves the per-ton result noticeably on small bales, so weigh a few representative bales.
  • Comparing only the price and not the quality. Moisture, dust, waste and feed value are not captured, so the cheapest ton is not always the cheapest feed.

About this calculator

Hay is sold by the bale, but bale size and weight vary wildly — a small square bale might weigh 40–60 lb (18–27 kg) while a large round bale can weigh 800–1,200 lb (360–540 kg) — so comparing prices bale-to-bale is misleading. The fix is to normalize to a common unit: Cost per US ton = (Price per bale ÷ Bale weight in lb) × 2,000, or Cost per metric ton = (Price per bale ÷ Bale weight in kg) × 1,000, which also give the cost per pound or per kilogram directly. A metric ton (1,000 kg, about 2,205 lb) is about 10% heavier than a US ton, so the two per-ton figures are not interchangeable.

Horse owners, cattle ranchers, and hay brokers use this conversion to compare quotes from different sellers offering different bale formats, and to budget winter feed costs per animal based on typical daily hay consumption.

Was this helpful?

You can pick up to 3 reactions.

Comments

  • Be the first to comment.

Popular calculators

All Calculators