Gas Mark to Fahrenheit Converter

Enter a gas mark or temperature to convert oven heat settings.

Result

400 °F
204 °C
°F = 250 + 25 × 6

How it is calculated

The tool follows the published oven charts. America's Test Kitchen and Electrolux UK both give gas mark ¼ as 225 °F, ½ as 250 °F and marks 1 to 9 in steps of 25 °F from 275 °F, the straight line °F = 250 + 25 × GM, where GM is the gas mark number; Electrolux UK adds mark 10 at 520 °F (270 °C), which Beko UK's chart puts at 500 °F. Between two chart rows the tool reads on a straight line, so it accepts any gas mark from ¼ to 10 (type 0.25 for ¼ and 0.5 for ½) and, in reverse, any temperature from 225 °F to 520 °F, and returns nothing outside those ranges. Celsius is then °C = (°F − 32) × 5 ÷ 9. In reverse, on the line from mark 1 to 9, it solves GM = (°F − 250) ÷ 25. Temperatures are rounded to a whole degree and a reverse gas mark to one decimal place, with ¼ and ½ written as on the dial; the working note shows the mark as you entered it, or the chart rows used.

Worked example

Say a recipe calls for gas mark 6. Multiply by 25: 6 × 25 = 150. Add 250: 250 + 150 = 400, so the oven setting is 400 °F. For Celsius subtract 32 (368), multiply by 5 (1840) and divide by 9, which gives 204.4, shown as 204 °C. Going back, 400 °F gives (400 − 250) ÷ 25 = 6.0 gas mark. A slow recipe at gas mark ½ gives 250 °F (121 °C), the chart's row, where the line would give 262.5 °F.

Try this example →

Common mistakes

  • Entering an oven temperature while the direction is set to gas mark to °F. A value like 180 is read as gas mark 180 and rejected, because the charts stop at gas mark 10.
  • Typing a Celsius temperature in the Fahrenheit reverse mode. 180 °C is about 356 °F, so convert it first or the tool will say 180 is out of range.
  • Typing ¼ or ½ as a fraction. The field takes a number: 0.25 for ¼ and 0.5 for ½.
  • Treating the rounded Celsius value as exact. 204 °C is rounded from 204.4, and fan ovens usually need a lower setting than the recipe states.

Sources

About this calculator

The gas mark scale is a British system for oven temperatures, historically tied to the pressure setting on gas ovens, starting at gas mark ¼ (225°F) and ½ (250°F) and running from gas mark 1 (about 275°F/135°C) to gas mark 9 (about 475°F/246°C) in fixed 25°F steps, with some charts adding a mark 10. This converter translates a gas mark from ¼ to 10 into its Fahrenheit equivalent, along with the matching Celsius reading, and can also turn a Fahrenheit temperature between 225°F (gas mark ¼) and 520°F (gas mark 10) back into a gas mark, since gas mark, Fahrenheit, and Celsius are the three temperature systems that appear interchangeably across older and modern British recipes.

It's a practical kitchen reference for home cooks following British or Commonwealth recipes on an oven dialed in Fahrenheit or Celsius, since many classic UK cookbooks — and plenty of newer ones — still list oven heat purely as a gas mark number without a numeric temperature alongside it.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

Oven recipes usually round, and so does the tool: gas mark 4 gives 350 °F and 177 °C, although most recipes say 180 °C. Mark 6 gives 400 °F and 204 °C, and mark 9 gives 475 °F. Going backwards, 375 °F returns gas mark 5.0, but a value like 180 returns nothing because the reverse direction expects Fahrenheit. Gas mark ¼ and ½ (type 0.25 and 0.5) give 225 °F and 250 °F, as the charts do. Which recipes are you trying to convert?

Comments

  • Be the first to comment.

Popular calculators

All Calculators