EV Cost Per Mile Calculator

Find out how much it costs to drive an electric vehicle per mile or per km based on your electricity rate.

How it is calculated

The tool needs the car's energy use in kWh per 100 miles (or, with the unit system set to metric, kWh per 100 km) and your electricity price per kWh. A metric figure is first turned into miles: kWh per 100 mi = kWh per 100 km × 1.609344. Then it converts consumption to one mile: kWh per mile = kWh per 100 mi ÷ 100, and cost per mile = kWh per mile × price and cost per 100 miles = cost per mile × 100. The cost per km is cost per mile ÷ 1.609344 and the cost per 100 km is 100 times that; all four are shown in either unit system. The money values are shown in dollars: the cost per mile and per 100 miles to the cent, the cost per km to four decimals (three from $0.10), so a few cents per km keep their digits. The 100-mile and 100-km figures are calculated from the unrounded costs, so they are more precise than 100 times the displayed per-mile or per-km value. Both inputs must be above zero. The cost covers electricity only. It uses the energy figure that you enter, so charging losses are included only if your kWh figure measures energy drawn from the wall.

Worked example

A car uses 28 kWh per 100 miles and electricity costs 0.17 per kWh. Energy per mile: 28 ÷ 100 = 0.28 kWh. Cost per mile: 0.28 × 0.17 = 0.0476, which the tool rounds to $0.05. Cost per 100 miles: 0.0476 × 100 = $4.76. The tool displays $0.05 per mile and $4.76 per 100 miles. Multiplying the rounded $0.05 by 100 would give $5.00, which shows why the 100-mile figure is the one to trust.

Try this example →

Common mistakes

  • Entering miles per kWh instead of kWh per 100 miles. A car that does 3.5 miles per kWh uses about 28.6 kWh per 100 miles, and typing 3.5 would give a cost about eight times too low.
  • Typing kWh per 100 km while the unit system is on US units. The figure is then read as per 100 miles and every cost comes out about 38% too low; switch the unit system to metric instead.
  • Typing the price in cents, such as 17 instead of 0.17. The tool takes your number as it is, so the per-mile cost comes out 100 times too high.
  • Using the home rate for a public fast charger. Prices differ, so run the tool once for each rate you really pay.
  • Multiplying the displayed per-mile cost by the distance. It is rounded to the cent, so use the per-100-mile result (or the per-km figure, shown to four decimals) for longer trips.
  • Using the battery size as the consumption. A 60 kWh battery is capacity, not the energy used per 100 miles.

About this calculator

An electric vehicle's running cost per mile is driven by two numbers: its energy consumption rate, usually rated in kilowatt-hours per 100 miles (the inverse of the EPA's MPGe efficiency figure) or per 100 km, and the price you pay per kilowatt-hour of electricity. Multiplying those together and dividing by 100 gives the cost of a single mile (or km), which this calculator shows per mile and per km and also scales up to a cost per 100 miles and per 100 km for easier comparison against a gas car's running cost.

EV owners and shoppers use this math to budget charging costs, especially since electricity rates vary widely by time of day, utility, and whether charging happens at home or at a public DC fast charger, and fleet managers use the same calculation across many vehicles to estimate total cost of ownership versus gasoline or diesel equivalents.

Was this helpful?

You can pick up to 3 reactions.

Comments

  • Be the first to comment.

Popular calculators

All Calculators