Electrical Load Calculator
Enter your home's area, lighting load and appliance load to size the panel.
Result
How it is calculated
The tool follows the NEC standard calculation for a single-family dwelling, line by line as a building department's worksheet lays it out (City of Calimesa, for 120/240 V services up to 225 A):
- general lighting:
area × 3 VA per sq ft(Table 220.12; the VA-per-area box lets you work in m² with about 32.3 VA/m²); - 1,500 VA for each small-appliance circuit, at least two (220.52(A)), and for each laundry circuit (220.52(B));
- those three summed, the first 3,000 VA at 100% and the rest at 35% (220.42);
- fixed appliances such as a dishwasher, disposal, microwave and fans: their total, or 75% of it when there are four or more (220.53);
- other loads (range, oven, dryer, heating or air conditioning, EV charger) at nameplate, and 25% of the largest motor (430.24);
current = service load ÷ voltage, as for a single-phase service.
The result lists each step. The worksheet notes that a range counts at least 8,000 VA and a dryer at least 5,000 VA, or the nameplate if larger, so enter them at no less than that. Above 225 A the result says the worksheet no longer applies. The voltage must be above zero and the counts whole numbers.
Worked example
A 1,800 sq ft home: general lighting 1,800 × 3 = 5,400 VA, plus two small-appliance circuits (3,000 VA) and one laundry circuit (1,500 VA), gives 9,900 VA. The first 3,000 VA count in full and the other 6,900 VA at 35% (2,415 VA), so the net general lighting load is 5,415 VA. Four fixed appliances (dishwasher 1,200, disposal 900, microwave 1,500 and bathroom fan 100, together 3,700 VA) count at 75%: 2,775 VA. A range (8,000 VA), a dryer (5,000 VA) and a water heater (4,500 VA) add 17,500 VA at nameplate. Service load = 5,415 + 2,775 + 17,500 = 25,690 VA, and 25,690 ÷ 240 = 107.04 A, so the service must be rated at least that; the actual rating is chosen by a qualified electrician applying the local code.
Common mistakes
- Entering appliance loads in kilowatts. The appliance field is a total in VA, so add up the nameplate figures first and convert kW to VA by multiplying by 1,000.
- Mixing area units: square meters with a density per square foot, or the reverse. Use both per sq ft (150 m² is about 1,615 sq ft) or both per m² (3 VA per sq ft is about 32.3 VA/m²).
- Forgetting large loads such as a range, dryer, water heater or air conditioner. The tool only adds what you enter in the other-loads box.
- Putting the dishwasher, disposal and microwave in the other-loads box. Entered there they count in full; as fixed appliances, four or more count at 75%.
- Treating the result as the final panel size. It covers a single-family dwelling on the standard method, with no allowance for future circuits, so an electrician applying the local code makes the final choice.
- Mixing voltages. Using 120 instead of 240 for a 240 V service doubles the current figure.
Sources
- NEC Standard Electrical Load Calculation for Single Family Dwellings (rev. 06-18-2024): Table 220.12, 220.52(A) and (B), 220.42, 220.53, 430.24 — City of Calimesa, California, Building and Safety
About this calculator
Sizing a home's electrical service starts from the logic of the NEC dwelling load calculation: general lighting load is figured per square foot of living area (the NEC uses 3 VA per square foot), and the appliance loads are added on top. Dividing the resulting total VA by the service voltage gives the required amperage. This calculator follows the NEC standard method as a building department's worksheet lays it out: 1,500 VA for each small-appliance circuit (at least two) and each laundry circuit is added to the lighting load, the first 3,000 VA of that total count in full and the rest at 35%, four or more fixed appliances count at 75%, other loads such as a range, dryer or EV charger count at nameplate, and 25% of the largest motor is added.
This calculator takes a home's floor area and the lighting VA per unit of that area (square feet with the NEC's 3 VA per sq ft, or square meters with about 32.3 VA per m²), the small-appliance and laundry circuits, the fixed appliances, the other loads and the service voltage, and returns the service load, the current and each step. Electricians use this calculation to get a first idea of whether an existing panel (commonly 100A or 200A) has enough capacity for a renovation or new appliance circuit, and home inspectors and electrical engineers use it as a quick check before the full code calculation that a service upgrade permit requires.
Was this helpful?
You can pick up to 3 reactions.
Popular calculators
Loan Calculator
Monthly payment, total interest and full amortization schedule.
Percentage Calculator
Percent change, percent of, and ratio calculations.
Discount Calculator
Calculate final price, savings, and discount amount.
BMI Calculator
Body mass index from height and weight (metric or imperial).
Age Calculator
Compute your exact age in years, months and days from a birth date.
Compound Interest Calculator
Calculate the final amount and interest earned with compounding.
All Calculators
- Loan Calculator
- Profit Calculator
- Discount Calculator
- BMI Calculator
- Percentage Calculator
- Ideal Weight Calculator
- Age Calculator
- Pregnancy Due Date Calculator
- Compound Interest Calculator
- BMR Calculator (Basal Metabolic Rate)
- Tip Calculator
- Fuel Cost Calculator
- Date Difference Calculator
- Sleep Cycle Calculator
- Daily Water Intake Calculator
- Simple Interest Calculator
- Heart Rate Zones Calculator
- Running Pace Calculator
- Pet Age Calculator
- Calories Burned Calculator
- Macro Calculator
- TDEE Calculator (Total Daily Energy Expenditure)
- Waist-to-Hip Ratio Calculator
- Honor Roll Calculator
- One Rep Max (1RM) Calculator
- Ovulation Calculator
- Electricity Cost Calculator
- Unit Price Calculator
- Savings Goal Calculator
- Break-Even Point Calculator
- Paint Calculator
- Course Grade Average Calculator
- Business Days Calculator
- Time Duration Calculator
- Fuel Economy Calculator
- Temperature Converter
- Tile Calculator
- Aspect Ratio Calculator
- Roman Numeral Converter
- Goal Weight Timeline Calculator
- Salary Converter (Hourly to Annual)
- Credit Card Validator (Luhn)
- Body Surface Area (BSA) Calculator
- Feels-Like Temperature Calculator
- Ohm's Law Calculator
- PPI (Pixel Density) Calculator
- Molar Mass Calculator
- Zodiac Sign Calculator (Western + Chinese)
- IBAN Validator
- Shoe Size Converter
- Country Info & Dialing Code Lookup
- Time Zone Difference (World Clock)
- CAGR (Compound Annual Growth Rate) Calculator
- Rule of 72 Calculator
- Blood Alcohol Content (BAC) Calculator
- Lean Body Mass (LBM) Calculator
- Pythagorean Theorem Calculator
- Speed Converter
- Download Time Calculator
- Date Calculator (Add/Subtract)
No calculators found
Comments