Deadhead Cost Calculator

Enter the empty distance, fuel economy, fuel price, and per-mile (or per-km) cost to find the deadhead cost.

How it is calculated

The cost has a fuel part and a per-mile part. fuel cost = (empty miles / mpg) × fuel price per gallon, operating cost = empty miles × other cost per mile, and total = fuel cost + operating cost. With the unit system set to metric, the distance is in kilometers, consumption in L/100 km and the fuel price per liter: fuel cost = empty km × L/100 km / 100 × price per liter and operating cost = empty km × other cost per km, which gives the same dollars for the same run. The tool also shows total / empty distance as a cost per empty mile and per empty km, in both systems. Prices are in dollars. The per-mile (or per-km) field is for everything else you want to charge to the empty run (tires, maintenance, driver pay); it must be filled in, so type 0 if you only want fuel. The distance can be zero, but the fuel economy must be above zero. Tolls, insurance and the lost revenue of the missed load are not added unless you fold them into the per-mile figure.

Worked example

A truck runs 180 empty miles to the next pickup at 6.5 mpg, with diesel at $3.80 a gallon and $0.45 per mile for tires, maintenance and driver pay. Gallons: 180 / 6.5 = 27.69. Fuel cost: 27.69 × 3.80 = $105.23. Operating cost: 180 × 0.45 = $81.00. Total: 105.23 + 81.00 = $186.23. That is about $1.03 for every empty mile. A load that pays less than this on top of its own costs would not cover the repositioning.

Try this example →

Common mistakes

  • Entering the loaded-trip mpg: a truck's fuel economy changes with weight, so use the figure for the empty run if you know it, not the average from heavy loads.
  • Leaving the per-mile field empty when there are no extra costs; the tool needs a 0 there, otherwise it shows no result.
  • Counting driver pay twice, once in the per-mile figure and again as a separate hourly cost outside the tool.
  • Typing kilometers, L/100 km or a price per liter while the unit system is on US units; L/100 km read as mpg turns the fuel cost upside down. Switch the unit system to metric instead.
  • Comparing the total with the load's rate alone; the revenue lost on the empty miles is not in the number, and only the cost of making the empty run is.

About this calculator

In trucking, deadhead miles are the distance a truck drives empty — without a paying load — typically after dropping off a delivery and repositioning to pick up the next one. Unlike loaded miles, deadhead miles generate zero freight revenue but still cost fuel, driver time, wear on the truck, tolls, and insurance exposure, calculated as (empty miles ÷ fuel economy) × fuel price, plus any additional per-mile operating cost like maintenance and driver pay. With the unit system set to metric the same cost is empty km × L/100 km ÷ 100 × price per liter, plus a cost per km.

Owner-operators, fleet dispatchers, and freight brokers track deadhead cost closely because it's one of the biggest hidden drains on trucking profitability — a load that pays well can still be a net loss once the empty miles needed to reach it and return afterward are factored in, which is why minimizing deadhead percentage is a core dispatch optimization goal.

Price the empty leg before you say yes: enter the deadhead distance, your fuel economy, the fuel price and any per-mile or per-km running cost, and the total dollar cost of repositioning appears, so you can judge whether the load still pays.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

The total is only half the decision; spread it over the loaded trip. If 150 empty miles cost 177.12 here, divide that by the miles of the load you are driving to, and add the result to your per-mile rate to see what the load must pay. The per-mile field is for tires, maintenance or driver pay. What do you fold into it?

Comments

  • Be the first to comment.

Popular calculators

All Calculators