Chains to Feet Converter

Converts surveyors' chains to feet and meters; a Gunter's chain is exactly 66 ft.

Result

495.00 ft
150.88 m

How it is calculated

A chain is a fixed length, so the conversion is a single multiplication. feet = chains × 66 and meters = chains × 20.1168. The meter factor is 66 feet times 0.3048 m per international foot. Both results are shown with two decimals; a result that would round to 0.00 keeps its significant digits, so 0.0001 chains shows as 0.01 ft and 0.00201 m. A negative value gives no result, since a length cannot be below zero. Only the chain count needs to be entered. The tool treats the chain as the 66-foot surveyor's (Gunter's) chain; it does not convert the 100-foot engineer's chain, and it does not use the slightly different US survey foot.

Worked example

A boundary description reads 7.5 chains. Multiply by 66: 7.5 × 66 = 495.00 ft. Multiply by 20.1168 for meters: 7.5 × 20.1168 = 150.876, shown as 150.88 m. As a check, 495 ft × 0.3048 = 150.876 m, which matches. One chain on its own is 66.00 ft or 20.12 m, and 10 chains is 660 ft, which is why 80 chains make a mile.

Try this example →

Common mistakes

  • Assuming a chain is 100 feet. That is the engineer's chain; the surveyor's chain used here is 66 feet.
  • Confusing a chain with a link. A link is one hundredth of a chain, 0.66 ft, so 75 links is 0.75 chains, not 75.
  • Entering feet in the chains field to check a result. The field takes chains only, so 66 chains is 4,356 ft, not 66 ft.
  • Expecting more than two decimals for small distances. A tiny value is rounded in the display, so multiply by hand if you need more precision.
  • Mixing up chains and square chains when computing area. Ten square chains make one acre, which is a different calculation from this length conversion.

Sources

About this calculator

A Gunter's chain — the surveying chain designed by Edmund Gunter in 1620 — is defined as exactly 66 feet (22 yards, 4 rods, or 100 links of 7.92 inches each), a length chosen so that 10 square chains equal exactly 1 acre, which is why it became the backbone unit of English-speaking land measurement for centuries.

Land surveyors still use the chain in the US Public Land Survey System and legal property descriptions (deeds routinely read "thence 20 chains to a stake"), and it survives elsewhere too — a cricket pitch is famously exactly one chain (22 yards) between the stumps.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

Old deeds and plats often mix chains with links and rods, so convert each leg separately and add the feet at the end. A call of 20 chains comes out here as 1,320.00 ft, or 402.34 m, which is a handy figure to compare against a modern survey of the same line. Bearings and chain lengths in a historical description may also have drifted from today's boundary. Do you work with a unit from old surveys that you would like added?

Comments

  • Be the first to comment.

Popular calculators

All Calculators