Buy vs Build House Calculator

Work out whether it's cheaper to buy an existing home or build a new one on your own land.

How it is calculated

Two totals are added up and compared:

buy = home price + renovation budget
build = land cost + (cost per sqft × size in sqft) + permits and fees
difference = |build − buy|

All money is in dollars. With the default US units the size is in square feet and the cost is per sqft; set Units to Metric to enter the size in square meters (m2) and the cost per m2 instead, with the same formulas. The land cost sits on the build side, so enter 0 only if you really already own the land. The tool shows which total is lower and by how much; equal totals give "Both options cost the same". Every field must be filled in (use 0 where something does not apply), none can be negative, and the size must be above zero; otherwise there is no result. It leaves out mortgage interest, closing costs, finishing upgrades, cost overruns and the extra months of rent while building.

Worked example

An existing home costs $420,000 and needs $35,000 of work, so the buy total is $455,000.00. Building means $90,000 for land, 2,200 sqft at $150 per sqft = $330,000, plus $12,000 in permits: 90,000 + 330,000 + 12,000 = $432,000.00. Build − buy = 432,000 − 455,000 = −23,000. The tool reports a cost difference of $23,000.00 with the verdict Building is cheaper. This ignores that a new build usually takes longer and tends to run over budget.

Try this example →

Common mistakes

  • Mixing units. The size and the cost per unit of area must match: with US units, 200 m2 entered as 200 makes the build look about ten times cheaper than it is, so choose Metric when both figures are in m2.
  • Leaving the size at 0 to see "just land and permits". A size of zero gives no result at all, because a house needs an area.
  • Leaving the land cost at 0 when you still have to buy the land. The build side then misses a large part of the real cost.
  • Using a per-sqft price that covers only the shell. Finishing, driveway, utility connections and landscaping may not be in it, and the tool adds nothing on top.
  • Treating the difference as the whole story. It is a cost comparison only; build time, rent while waiting, cost overruns and loan interest are not included.

About this calculator

A buy vs. build comparison adds up the total cost of two paths to homeownership: buying an existing home (purchase price plus renovation costs to bring it to the desired standard) versus building a new house (land cost plus construction cost per square foot plus permit and other fees; enter 0 for land if you already own it). Comparing the two totals shows which route is actually cheaper for a given target home size and quality.

Homebuyers and self-builders run this comparison because the two paths involve very different cost structures — an existing home has a known purchase price but often hidden renovation needs (roofing, electrical, plumbing), while new construction has a more predictable per-square-foot cost but adds land, permit fees, site work, and typically a longer timeline before move-in. Builders and real estate agents also use similar cost-per-square-foot benchmarks when advising clients on land they already own versus resale inventory in their market.

On one side, the price and renovation budget of an existing home; on the other, land, construction cost per square foot, size in square feet (or both in m² with the Metric option) and permits for a new build: both totals appear side by side so you can see which is cheaper for you.

Was this helpful?

You can pick up to 3 reactions.

Comments

  • Be the first to comment.

Popular calculators

All Calculators