Brick Calculator
Find how many bricks you need.
Result
How it is calculated
You enter the wall area in m², the brick length and height in cm and the mortar joint in mm (10 mm by default). The tool adds one joint to each brick dimension and converts the result to m², face = (length ÷ 100 + joint ÷ 1000) × (height ÷ 100 + joint ÷ 1000), then works out bricks = area ÷ face × 1.1 and rounds up to the next whole brick. The 1.1 is a fixed 10 percent allowance for cuts and breakages; the Brick Industry Association adds at least 5 percent as a general rule. The 10 mm joint is the standard for metric bricks (a 215 × 65 mm brick lays at 225 × 75 mm, about 60 bricks per m²); US modular brick are made for a 3/8 in. (9.5 mm) joint. The count is for one skin of bricks (a half-brick wall), and does not work out thickness, mortar or openings. Brick sizes differ by country; the area must not be negative and the joint must be between 0 and 50 mm.
Worked example
A wall of 12 m² built with bricks of 21.5 cm by 6.5 cm and the default 10 mm joint. Each brick covers (0.215 + 0.010) × (0.065 + 0.010) = 0.225 × 0.075 = 0.016875 m². Bricks before waste: 12 ÷ 0.016875 = 711.1. Adding 10 percent gives 711.1 × 1.1 = 782.2, and rounding up gives the tool's result of 783 bricks. With the joint set to 0 the same wall needs 945, because each brick then covers only its own face.
Common mistakes
- Entering the brick size in millimeters or meters. The fields are centimeters, so 215 would be read as 215 cm.
- Entering the brick size with the joint already added and leaving the joint at 10 mm. The joint is then counted twice; enter the bare brick size, or set the joint to 0.
- Entering the wall width or height instead of the area. The tool wants one area in m², so multiply width by height first.
- Forgetting to subtract windows and doors. The area you enter is all that is counted, so openings left in raise the quantity.
- Treating the result as the count for a thicker wall. The tool counts one brick layer; a wall two bricks thick needs roughly twice as many.
Sources
- Brick sizes — Designing Buildings Wiki
- Technical Note 10: Dimensioning and Estimating Brick Masonry — Brick Industry Association, 2009
About this calculator
This calculator estimates how many bricks a wall needs from its total wall area (m²), the brick's face length and height (cm) and the mortar joint (mm). Each brick covers its own face plus one joint, so a 21.5 × 6.5 cm brick with the standard 10 mm joint covers 22.5 × 7.5 cm, about 59 bricks per m² (trade tables round this to 60); US modular brick are made for a 3/8 in. (9.5 mm) joint. A standard 10% waste allowance for cuts and breakages is then added.
Builders, bricklayers, and DIYers use it before ordering materials for a garden wall, extension, or feature wall, so they can buy the right quantity in one trip instead of running short mid-project or over-ordering.
Was this helpful?
You can pick up to 3 reactions.
Comments
- Be the first to comment.
Popular calculators
Loan Calculator
Monthly payment, total interest and full amortization schedule.
Percentage Calculator
Percent change, percent of, and ratio calculations.
Discount Calculator
Calculate final price, savings, and discount amount.
BMI Calculator
Body mass index from height and weight (metric or imperial).
Age Calculator
Compute your exact age in years, months and days from a birth date.
Compound Interest Calculator
Calculate the final amount and interest earned with compounding.
All Calculators
- Loan Calculator
- Profit Calculator
- Discount Calculator
- BMI Calculator
- Percentage Calculator
- Ideal Weight Calculator
- Age Calculator
- Pregnancy Due Date Calculator
- Compound Interest Calculator
- BMR Calculator (Basal Metabolic Rate)
- Tip Calculator
- Fuel Cost Calculator
- Date Difference Calculator
- Sleep Cycle Calculator
- Daily Water Intake Calculator
- Simple Interest Calculator
- Heart Rate Zones Calculator
- Running Pace Calculator
- Pet Age Calculator
- Calories Burned Calculator
- Macro Calculator
- TDEE Calculator (Total Daily Energy Expenditure)
- Waist-to-Hip Ratio Calculator
- Honor Roll Calculator
- One Rep Max (1RM) Calculator
- Ovulation Calculator
- Electricity Cost Calculator
- Unit Price Calculator
- Savings Goal Calculator
- Break-Even Point Calculator
- Paint Calculator
- Course Grade Average Calculator
- Business Days Calculator
- Time Duration Calculator
- Fuel Economy Calculator
- Temperature Converter
- Tile Calculator
- Aspect Ratio Calculator
- Roman Numeral Converter
- Goal Weight Timeline Calculator
- Salary Converter (Hourly to Annual)
- Credit Card Validator (Luhn)
- Body Surface Area (BSA) Calculator
- Feels-Like Temperature Calculator
- Ohm's Law Calculator
- PPI (Pixel Density) Calculator
- Molar Mass Calculator
- Zodiac Sign Calculator (Western + Chinese)
- IBAN Validator
- Shoe Size Converter
- Country Info & Dialing Code Lookup
- Time Zone Difference (World Clock)
- CAGR (Compound Annual Growth Rate) Calculator
- Rule of 72 Calculator
- Blood Alcohol Content (BAC) Calculator
- Lean Body Mass (LBM) Calculator
- Pythagorean Theorem Calculator
- Speed Converter
- Download Time Calculator
- Date Calculator (Add/Subtract)
No calculators found
Note from the editors
Round the result up to whole pallets or packs from your supplier, and order everything in one go. Bricks from different production batches can differ slightly in color, and a later delivery may not blend into the wall. Which standard brick sizes in your country would you like us to list as examples?