Arcminute to Degree Converter

Converts angles between arcminutes and degrees either way; one degree is 60 arcminutes.

How it is calculated

One degree is divided into 60 arcminutes, so the conversion is a single multiplication or division. From arcminutes to degrees: degrees = arcminutes ÷ 60. From degrees to arcminutes: arcminutes = degrees × 60. You enter one value and choose the direction; the tool shows the converted number to four decimals, a line stating the rate, and your input repeated with its unit. Negative values and decimals are accepted, and the sign is kept. The result is a decimal number of degrees, not degrees-minutes-seconds. A direction other than the two options gives no result. Arcseconds are not handled, so convert them to arcminutes first (divide by 60).

Worked example

Convert 100 arcminutes to degrees. Degrees = 100 ÷ 60 = 1.6667 deg. In the other notation, the whole part is 1 degree, and the remaining 0.6667 × 60 = 40 arcminutes, so 100′ is 1° 40′. In the opposite direction, 2.75 degrees × 60 = 165 arcminutes. The Moon's apparent width of about 30 arcminutes works out to 30 ÷ 60 = 0.5 degrees.

Try this example →

Common mistakes

  • Reading 1.6667 degrees as 1 degree 66.67 minutes; the part after the decimal point is a fraction of a degree, so 0.6667 degrees is 40 arcminutes, not 66.
  • Choosing the wrong direction and not noticing: the unit printed after the number (deg or arcmin) shows which way the conversion ran.
  • Mixing up arcminutes and arcseconds: 1 arcminute is 60 arcseconds, so a value in arcseconds must be divided by 60 first, or by 3600 for degrees.
  • Confusing arcminutes with minutes of time: 60 arcminutes in a degree is an angle, while right ascension or time zones use hours, minutes and seconds of time.
  • Dropping the sign of a negative angle: the tool keeps it, so −30 arcminutes gives −0.5 degrees, which is a different direction from +0.5.

Sources

About this calculator

An arcminute is a unit of angular measurement equal to 1/60th of a degree, further subdivided into 60 arcseconds — the same base-60 system the Babylonians used for both angles and time, which is why "minutes" and "seconds" show up in both contexts.

Arcminutes give astronomers and opticians a finer unit than the degree for describing small angles: the Moon's apparent diameter is about 30 arcminutes (half a degree), and a telescope's resolving power or a lens's field of view are commonly specified in arcminutes — units too small to conveniently express as a fraction of a degree.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

If the angle comes from optics or sighting, the arcminute has a handy physical meaning: one arcminute spans about 29 millimeters at 100 meters, or about 29 centimeters at a kilometer. So 90 arcminutes, which the tool turns into 1.5 degrees, covers roughly 26 meters at 1 kilometer. Small-angle arithmetic like this holds well only for small angles. Are you converting telescope field of view, rifle scope adjustments or map coordinates?

Comments

  • Be the first to comment.

Popular calculators

All Calculators