Acres to Hectares Converter

Enter an area in acres to convert to hectares and square meters.

Result

5.0586 ha
50,585.71 m²

How it is calculated

The tool multiplies the number of acres by two factors: hectares = acres × 0.40468564224 and m² = acres × 4046.8564224. These are the international acre of 43,560 square feet of 0.3048 m (the 1959 foot), which is exactly 4,046.8564224 m² (NIST Handbook 44, Appendix C), and the hectare is 10,000 m², so the two factors differ by a factor of 10,000. Hectares are shown to four decimals and square meters to two. Any number from zero up is accepted, including decimals; a negative value gives no result, since an area cannot be below zero. The US survey acre differs very slightly (by about two parts per million) from the international one, which only matters for large legal surveys.

Worked example

A farm is advertised as 12.5 acres. Hectares: 12.5 × 0.40468564224 = 5.058570528, which the tool rounds to 5.0586 ha. Square meters: 12.5 × 4,046.8564224 = 50,585.71 m². As a check, 50,585.71 / 10,000 = 5.0586, the same area in hectares. So 12.5 acres is a little over 5 hectares.

Try this example →

Common mistakes

  • Dividing by 0.4047 instead of multiplying; acres to hectares always makes the number smaller, since one acre is less than half a hectare.
  • Confusing the hectare with the "are" (100 m²) or treating 1 ha as 1,000 m²; it is 10,000 m².
  • Using the rule of thumb "2.5 acres per hectare" for large areas, where the small rounding adds up.
  • Mixing up acres with square feet: one acre is 43,560 square feet, so convert square feet first before using this tool.

Sources

About this calculator

The acre, a unit rooted in medieval English plowing (originally the area a yoke of oxen could plow in a day), converts to the metric hectare at 1 acre = 0.404686 hectares (4,046.86 m²), since a hectare is defined simply as 10,000 square meters.

Land surveyors, real estate professionals and farmers move between the two constantly: the acre remains the standard land unit in the US, UK and much of the former British Empire, while hectares are the norm nearly everywhere else and in international agricultural statistics, so cross-border land deals, crop yield reports (tons per hectare) and farm size comparisons routinely need this conversion.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

The square meter line is the handy bridge to other local units. If a listing uses a unit based on 1,000 m2, such as the Turkish donum, divide the m2 figure by 1,000: 10 acres is 40,468.56 m2, or about 40.47 of those units. For a mental check on the hectare result, multiply the acres by 0.4. Which land units do you most often need to convert to or from?

Comments

  • Be the first to comment.

Popular calculators

All Calculators