Swim Pace Calculator

Calculate your swim pace per 100m and average speed.

Result

1:53 /100m
0.89 m/s

How it is calculated

Swim pace is quoted per 100 m. The tool turns your time into seconds, T = minutes × 60 + seconds, then scales to 100 m: pace = T / (distance / 100). The pace is rounded to the nearest second and shown as m:ss. Average speed is v = distance / T in meters per second, to two decimals. Distance is in meters and must be above zero, and the total time must be above zero. A swim faster on average than the 50 m freestyle world record, 19.90 s in a 25 m pool (2.51 m/s; World Aquatics records), gives no result. Minutes or seconds may be left empty (counted as 0), so a time of 90 seconds can be entered in one field. Because pace is rounded to whole seconds, two close swims can show the same pace.

Worked example

You swim 400 m in 7 minutes 30 seconds. Total time T = 7 × 60 + 30 = 450 s. Pace per 100 m = 450 / (400 / 100) = 450 / 4 = 112.5 s, which rounds to 113 s, or 1 minute 53 seconds. Speed = 400 / 450 = 0.89 m/s. The result is a pace of 1:53 /100m and an average speed of 0.89 m/s.

Try this example →

Common mistakes

  • Entering the distance in yards or kilometers. The field is meters; a 1.5 km swim is 1500.
  • Typing the time as 7.30 in the minutes field when you mean 7 minutes 30 seconds. That is 7.3 minutes, i.e. 7 min 18 s.
  • Including rests at the wall in the total time and expecting a pure swimming pace.
  • Comparing pool and open-water paces directly; currents, turns and sighting change the real distance and speed.
  • Leaving both minutes and seconds empty, which gives no result.

About this calculator

This calculator turns your swim distance and time into a pace per 100 meters (mm:ss) and your average speed in meters per second — the two numbers swimmers actually use to track and compare performance.

Pool swimmers, triathletes, and coaches use it during training to check whether a set was swum at the target pace, and to plan race splits ahead of a competition based on a goal finish time.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

A quick way to use the pace: divide it by the number of lengths in 100 m. In a 25 m pool a 1:53 pace means roughly 28 seconds per length, which is easier to check against the pace clock while you swim. Remember the pace averages everything you enter, so wall rests inflate it. What distance do you plan most sets around, 400 m, 1500 m or open water?

Comments

  • Be the first to comment.

Popular calculators

All Calculators