Standing Wave Calculator

Find standing wave harmonics on a string.

Result

738.46 Hz
0.4333 m

How it is calculated

For a string fixed at both ends, the tool uses fn = n × v ÷ (2 × L) and λn = 2 × L ÷ n. Here v is the wave speed along the string in m/s, L is the string length in meters and n is the harmonic number: 1 is the fundamental, 2 the first overtone and so on. The harmonic must be a whole number, so 2.6 gives no result. Speed and length must be above zero and n must be at least 1. Frequency is in Hz with two decimals, wavelength in meters with four. The tool takes the wave speed as an input; it does not calculate it from tension and mass.

Worked example

A string 0.65 m long carries waves at 320 m/s. We want the third harmonic (n = 3). Twice the length is 2 × 0.65 = 1.3 m. Frequency: 3 × 320 ÷ 1.3 = 738.46 Hz. Wavelength: 1.3 ÷ 3 = 0.4333 m. The fundamental of the same string would be 320 ÷ 1.3 ≈ 246.15 Hz, so the third harmonic is exactly three times that. It fits three half-wavelengths into the string.

Try this example →

Common mistakes

  • Entering the speed of sound in air, about 343 m/s, instead of the wave speed on the string. They are unrelated.
  • Using this for a pipe closed at one end. Such pipes support only odd harmonics with a different formula.
  • Treating n as the number of nodes. For a string fixed at both ends, the n-th harmonic has n − 1 nodes between the ends.
  • Entering length in centimeters, which makes frequency a hundred times too low.
  • Typing 0 for the fundamental. The fundamental is n = 1; n = 0 gives no result.

Sources

About this calculator

A standing wave forms on a string fixed at both ends when waves reflecting back and forth interfere to create stationary nodes and antinodes; only wavelengths that fit an integer number of half-wavelengths between the fixed ends survive, giving the harmonic series fₙ = n·v/(2L), where v is the wave speed on the string, L is its length, and n = 1, 2, 3… labels the fundamental and its overtones.

This relationship is the physical basis of every stringed instrument: guitar makers and piano technicians use it to relate string length, tension and mass per unit length (which set v) to pitch, and it's a standard demonstration and lab exercise in introductory physics courses on wave mechanics and acoustics.

Musicians tuning instruments, luthiers designing new ones, acoustic engineers analyzing resonance, and physics students verifying harmonic series experimentally all use this formula to predict or explain the frequencies a vibrating string can sustain.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

Sound speed in air plays no part here. If you know the tension T and the mass per unit length, the wave speed is the square root of T divided by that mass per length. A string of 0.65 m with a wave speed of 200 m/s has a fundamental of 153.85 Hz. Enter harmonic 2, 3 and so on for overtones. Are you modeling a string or a pipe?

Comments

  • Be the first to comment.

Popular calculators

All Calculators