SRM Beer Color (Morey)
Predict your beer's SRM color from grain weight, color and volume.
Result
How it is calculated
The tool applies the Morey equation in two steps. First the malt color units: MCU = grain weight × Lovibond ÷ volume, with grain weight in pounds, color in degrees Lovibond (°L) and batch volume in US gallons. With the unit system on metric the weight is in kilograms and the volume in liters; the tool converts them to pounds and gallons (÷ 0.45359 and ÷ 3.78541) before the same formula, which makes MCU = 8.3454 × kilograms × Lovibond ÷ liters, so the same malt bill gives the same MCU and SRM in both systems. Then SRM = 1.4922 × MCU0.6859. Both results are shown to one decimal. There is only one grain entry, so a recipe with several malts must be reduced to a single weight and an effective color (or the weight-times-color products added together by hand and entered as one). A volume of zero or less, or a negative weight or color, gives no result; a weight of zero gives 0.0.
Worked example
A batch uses 11 lb of grain at 20 °L and makes 5.5 gallons. MCU = 11 × 20 ÷ 5.5 = 220 ÷ 5.5 = 40.0. Raise 40 to the power 0.6859, which gives about 12.56. Multiply by 1.4922: 1.4922 × 12.56 ≈ 18.7. The tool shows an SRM of 18.7 and an MCU of 40.0, a deep amber to light brown color. If the same grain went into a 7 gallon batch, MCU would fall to 31.4 and SRM to about 15.9.
Common mistakes
- Typing kilograms or liters while the unit system is on US units. They are read as pounds and gallons (5 kg in 25 L would give 3.9 SRM instead of 16.6); switch the unit system to metric instead, or convert (a 20 liter batch is about 5.3 gallons).
- Entering the color as EBC instead of Lovibond. EBC values are about double the Lovibond value, which gives a much darker prediction.
- Using one malt's color for a recipe that mixes pale base malt with a handful of dark roasted malt. Combine them first: weight × color for each, added up, then divided by volume.
- Treating the figure as exact. Morey's equation is a prediction, and it becomes less reliable for very dark beers.
- Expecting the color to double when MCU doubles. It does not, because of the 0.6859 power, so 40 MCU is not twice the SRM of 20.
Sources
- Seeing the Color in Your Future (Morey: SRM = 1.4922 × MCU^0.6859) — Jester Goldman, Craft Beer & Brewing Magazine, 2017
About this calculator
The Morey equation estimates a beer's color on the SRM (Standard Reference Method) scale from its grain bill: SRM = 1.4922 x (MCU^0.6859), where MCU (malt color units) equals grain weight in lbs times grain color in degrees Lovibond, divided by batch volume in gallons, summed across all grains in the recipe (in metric the same MCU is 8.3454 × kilograms × °L ÷ liters). The exponent corrects for the fact that color doesn't scale linearly with malt color contribution at the darker end.
Homebrewers and craft brewers use SRM to predict what a beer will look like before brewing it — a pale lager sits around 2-3 SRM, an amber ale around 10-17, and a stout can run 30+ SRM (effectively opaque black past about 40) — which matters both for matching a style's guidelines (BJCP style ranges reference SRM) and for choosing a grain bill that hits a target appearance. It's a standard field in recipe-building software like BeerSmith and Brewer's Friend.
This calculator takes the weight (in lb, or kg with the unit system on metric) and Lovibond color of a single grain plus your batch volume (in US gallons, or liters) and returns the predicted SRM and MCU using the Morey formula. For a recipe with several grains, run each grain separately, add up their MCU values, and apply SRM = 1.4922 x (MCU^0.6859) to the total.
Was this helpful?
You can pick up to 3 reactions.
Popular calculators
Loan Calculator
Monthly payment, total interest and full amortization schedule.
Percentage Calculator
Percent change, percent of, and ratio calculations.
Discount Calculator
Calculate final price, savings, and discount amount.
BMI Calculator
Body mass index from height and weight (metric or imperial).
Age Calculator
Compute your exact age in years, months and days from a birth date.
Compound Interest Calculator
Calculate the final amount and interest earned with compounding.
All Calculators
- Loan Calculator
- Profit Calculator
- Discount Calculator
- BMI Calculator
- Percentage Calculator
- Ideal Weight Calculator
- Age Calculator
- Pregnancy Due Date Calculator
- Compound Interest Calculator
- BMR Calculator (Basal Metabolic Rate)
- Tip Calculator
- Fuel Cost Calculator
- Date Difference Calculator
- Sleep Cycle Calculator
- Daily Water Intake Calculator
- Simple Interest Calculator
- Heart Rate Zones Calculator
- Running Pace Calculator
- Pet Age Calculator
- Calories Burned Calculator
- Macro Calculator
- TDEE Calculator (Total Daily Energy Expenditure)
- Waist-to-Hip Ratio Calculator
- Honor Roll Calculator
- One Rep Max (1RM) Calculator
- Ovulation Calculator
- Electricity Cost Calculator
- Unit Price Calculator
- Savings Goal Calculator
- Break-Even Point Calculator
- Paint Calculator
- Course Grade Average Calculator
- Business Days Calculator
- Time Duration Calculator
- Fuel Economy Calculator
- Temperature Converter
- Tile Calculator
- Aspect Ratio Calculator
- Roman Numeral Converter
- Goal Weight Timeline Calculator
- Salary Converter (Hourly to Annual)
- Credit Card Validator (Luhn)
- Body Surface Area (BSA) Calculator
- Feels-Like Temperature Calculator
- Ohm's Law Calculator
- PPI (Pixel Density) Calculator
- Molar Mass Calculator
- Zodiac Sign Calculator (Western + Chinese)
- IBAN Validator
- Shoe Size Converter
- Country Info & Dialing Code Lookup
- Time Zone Difference (World Clock)
- CAGR (Compound Annual Growth Rate) Calculator
- Rule of 72 Calculator
- Blood Alcohol Content (BAC) Calculator
- Lean Body Mass (LBM) Calculator
- Pythagorean Theorem Calculator
- Speed Converter
- Download Time Calculator
- Date Calculator (Add/Subtract)
No calculators found
Comments