Oxygen Saturation Index Calculator

A non-invasive oxygenation index for grading respiratory failure severity.

Result

7.66
Mild/moderate
157 (SpO₂/FiO₂)

How it is calculated

The tool computes OSI = FiO₂ × MAP × 100 ÷ SpO₂, with FiO₂ as a fraction (so 60% is used as 0.60), MAP as the mean airway pressure in cmH₂O and SpO₂ in percent. You type FiO₂ in percent. It also prints the SpO₂/FiO₂ ratio, SpO₂ ÷ FiO₂, rounded to a whole number. Grading follows PALICC-2 (2023) for a child on invasive ventilation: below 5 is shown as below the PARDS threshold, 5 to under 12 mild/moderate (PALICC-2 grades the two together) and 12 or more severe. An OSI of 5 is the PARDS cut-off; 4 is the cut-off of the oxygenation index (OI), which uses PaO₂, not of OSI. PALICC-2 grades severity at least 4 hours after the diagnosis, at a steady state, and uses SpO₂ only when it is 97% or lower. FiO₂ and SpO₂ must be above 0 and not more than 100, and MAP must be above 0. The OSI result is only meaningful for patients who are on a ventilator with a measured mean airway pressure.

Worked example

A ventilated child is on FiO₂ 60%, mean airway pressure 12 cmH₂O, with SpO₂ 94%. OSI = 0.60 × 12 × 100 ÷ 94 = 720 ÷ 94 = 7.66. That is 5 or more and below 12, so the grade is "Mild/moderate". The S/F ratio is 94 ÷ 0.60 = 156.7, shown as "157 (SpO₂/FiO₂)". If the oxygen saturation fell to 88% with the same settings, OSI would rise to 8.18, still mild/moderate; with a mean airway pressure of 18 cmH₂O as well it would be 0.60 × 18 × 100 ÷ 88 = 12.27, severe.

Try this example →

Common mistakes

  • Typing FiO₂ as a fraction (0.6) instead of percent (60): the tool then reads 0.6% and returns an OSI of 0.08, "Below PARDS threshold".
  • Using the arterial PaO₂ instead of the pulse-oximeter SpO₂; this index is built on the saturation reading.
  • Entering the peak or plateau pressure instead of the mean airway pressure, which overstates the index.
  • Reading "Below PARDS threshold" as proof of no lung injury; it only means this index is under 5.
  • Using an SpO₂ above 97%: on the flat top of the saturation curve the reading barely moves, so PALICC-2 does not use it.
  • Entering a mean airway pressure in other units (kPa, mmHg) or an implausible value like 150; the engine accepts any positive number and does not warn.

Sources

About this calculator

The Oxygen Saturation Index (OSI) is a non-invasive substitute for the traditional Oxygenation Index, calculated as (FiO₂ × mean airway pressure × 100) divided by SpO₂. It was developed because the classic Oxygenation Index needs an arterial blood gas to get PaO₂, which requires an arterial line — something not every ventilated patient, especially children, has in place.

Because pulse oximetry (SpO₂) is continuous and non-invasive, OSI lets clinicians in pediatric and neonatal intensive care grade the severity of respiratory failure and monitor it in real time without repeated blood draws. The Pediatric Acute Lung Injury Consensus Conference criteria use it for children on invasive ventilation: in PALICC-2 (2023) an OSI of 5 or more meets the oxygenation criterion for pediatric ARDS (PARDS), below 12 is mild/moderate and 12 or more is severe.

Was this helpful?

You can pick up to 3 reactions.

Comments

  • Be the first to comment.

Popular calculators

All Calculators