Carbonation Volumes Calculator

Enter the beer temperature (°F or °C) and head pressure (psi or bar) to get the CO₂ carbonation in volumes.

Result

2.58 vol

How it is calculated

The tool uses a CO2 solubility equation: V = (P + 14.695) × (0.01821 + 0.09011 × e−(T − 32) / 43.11) − 0.003342. T is the liquid temperature in degrees Fahrenheit and P the gauge pressure in psi, the number on your regulator. Adding 14.695 converts gauge to absolute pressure. With the unit system on metric the temperature is typed in °C and the pressure in bar; the tool converts them to °F and psi (°F = °C × 9/5 + 32, psi = bar ÷ 0.0689476) before the same equation, so the same keg gives the same volumes in both systems. The answer V is dissolved CO2 in volumes, shown with two decimals, and it never goes below 0. Pressure cannot be negative. Higher pressure and colder liquid both raise the volumes. The value is an equilibrium figure, so the liquid must sit at that pressure and temperature long enough to absorb the gas, which can take days without agitation. Altitude changes the atmospheric pressure but is not included. Enter the temperature in the unit system's unit: Fahrenheit on US units, Celsius on metric.

Worked example

A keg sits at 38 °F (about 3.3 °C) with the regulator set to 12 psi. Temperature term: e−(38−32)/43.11 = 0.8701, so 0.01821 + 0.09011 × 0.8701 = 0.09661. Absolute pressure: 12 + 14.695 = 26.695. Multiply: 26.695 × 0.09661 = 2.5791. Subtract 0.003342 to get 2.58 volumes. That is in the range typically quoted for American-style lagers. At the same 38 °F with 0 psi the result is 1.42 vol, which shows how much CO2 still dissolves at atmospheric pressure.

Try this example →

Common mistakes

  • Typing Celsius while the unit system is on US units. The field then reads Fahrenheit, so 3 °C typed as 3 is read as 3 °F and the volumes come out far too high (5.20 at 12 psi). Switch the unit system to metric instead.
  • Typing the pressure in bar while the unit system is on US units, or in psi on metric. The field is psi gauge on US units and bar gauge on metric; 1 bar is about 14.5 psi.
  • Using the temperature of the room instead of the beer. The liquid temperature matters, and a keg in a fridge is much colder than the room.
  • Expecting the carbonation level straight away. The formula gives the final equilibrium, and a still keg set to 12 psi may need many days to reach it.
  • Adding the 14.7 psi atmosphere yourself. The tool already does it, so enter the regulator reading directly.

Sources

About this calculator

This calculator determines dissolved CO₂ in volumes — the standard brewing unit where 1 volume means 1 liter of CO₂ gas (at standard conditions) dissolved per liter of liquid — from the liquid temperature and the head pressure applied above it, using the solubility relationship behind classic force-carbonation charts. Colder liquid holds more dissolved gas at any given pressure, which is why brewers chill beer before force-carbonating it.

Most American lagers sit around 2.5–2.8 volumes, British ales closer to 1.5–2.0, and Belgian styles or sodas can run 3.0–4.5 volumes or higher. Homebrewers and beverage producers use this figure to dial in a keg's regulator pressure at a known fridge temperature to hit the exact carbonation level a style calls for.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

Fridge dials can drift, so check the liquid with a thermometer. At 12 psi the tool gives 2.58 volumes at 38 °F but only 2.26 at 45 °F, a gap that matters for a lager. Moving the regulator by 2 psi at 38 °F shifts the result by about 0.2 volumes. What style and target volumes are you aiming for?

Comments

  • Be the first to comment.

Popular calculators

All Calculators