Billable Utilization Calculator

See what share of your hours are billable.

Result

70.00%

How it is calculated

The tool divides billable hours by total hours and shows the result as a percentage: utilization = billable hours / total hours × 100. Both values are in hours for the same period (a week, a month) and the same person or team. Total hours must be above zero and billable hours cannot be negative, otherwise no result appears. The tool does not cap the answer at 100%, so billable hours larger than the total give a figure above 100% (45 billable of 40 total shows 112.50%), which usually points to a data entry slip or to overtime measured against a standard week. The result has two decimals.

Worked example

A consultant bills 28 hours in a week with a 40-hour standard week. Step 1: 28 / 40 = 0.7. Step 2: 0.7 × 100 = 70. The tool shows a billable utilization of 70.00%. The remaining 12 hours went to non-billable work such as admin, internal meetings or training.

Try this example →

Common mistakes

  • Mixing denominators: dividing by hours actually worked in one report and by the 40-hour standard in another makes people unfairly comparable.
  • Counting all logged hours as billable; hours written off or not invoiced should be left out of the billable figure.
  • Entering billable time in days or minutes while total is in hours.
  • Comparing a one-week figure against a monthly one; periods for both inputs must match.
  • Expecting the result to stay under 100%; if it does not, check the inputs rather than the tool.

About this calculator

Billable utilization is the share of total available hours that were spent on billable client work: utilization = billable hours ÷ total hours × 100, where total hours can mean actual hours worked, or a standard capacity like a 40-hour week, depending on what the metric is meant to answer. The two definitions matter — utilization against actual worked hours measures how well available time was used, while utilization against standard capacity also captures unpaid overtime or underused capacity.

Professional services firms — law firms, consultancies, agencies, and accounting practices — track billable utilization per employee and per team as a core productivity and staffing metric, since it directly drives revenue in time-and-materials or hourly billing models. Resource managers use it to spot over- or under-staffed teams, and partners or practice leads use aggregate utilization trends to price engagements and plan hiring.

Was this helpful?

You can pick up to 3 reactions.

Note from the editors

Turn the percentage into a weekly target by working backwards: a 75% goal on a 40-hour week means 30 billable hours, which leaves 10 for admin, meetings and training. One week can swing a lot with holidays and proposals, so it often helps to enter four or more weeks of hours together instead of judging a single week. Do you measure against actual hours or standard capacity?

Comments

  • Be the first to comment.

Popular calculators

All Calculators